AR54.65-P-0002R | Remove/install Parktronic system (PTS) sensors in rear bumper | 23.1.08 |
MODEL 230.4 with CODE (220) Parktronic system (PTS)
P54.65-2737-07
Shown on vehicle up to 28.1.08 without code (809) Model year 2009
1 Protective strip (up to 28.1.08 without code (809) Model year 2009)
2 Rear bumper
3 Shackles
4 Sealing ring
A43b9 Left inner sensor
A43b10 Left outer sensor
A43b7 Right outer sensor, rear bumper
A43b8 Right inner sensor
| Remove/install | ||
| Information on preventing damage to electronic components due to electrostatic discharge | ||
1.1 | Remove ram strip (1) from rear bumper (2) | For vehicles up to 28.1.08 without code (809) Model year 2009 | |
1.2 | Remove rear bumper (2) | For vehicles as of 29.1.08 or with code (809) Model year 2009 | |
2 | Expose sensor (A43b7, A43b8, A43b9, A43b10) and detach electrical connector | ||
3.1 | Release lugs (3) using the release tool towards the direction of the arrow and remove sensors (A43b7, A43b8, A43b9, A43b10) | For vehicles up to 28.1.08 without code (809) Model year 2009 | |
Installation: Check sealing ring (4) and replace if damaged. | |||
| |||
3.2 | Unclip sensor (A43b7, A43b8, A43b9, A43b10) by hand from rear bumper (2) and remove | For vehicles as of 29.1.08 or with code (809) Model year 2009 | |
Unclip sensor (A43b7, A43b8, A43b9, A43b10) at lugs (3). | |||
Installation: Check sealing ring (4) and replace if damaged. | |||
4 | Install in the reverse order |
Unlocking tool
168 589 02 31 00
Powiązane dokumenty
- ah5400p000101a Wskazówki dotyczące zapobiegania uszkodzeniom elementów elektronicznych na skutek rozładowania potencjału elektrostatycznego
- ar8820p2200r
- ar8880p2220r