ar5465p0002fr

Remove/install Parktronic system (PTS) sensors in rear bumper

Typ ar · temat 54.65 · wersja 0101 · 2018-11-26

Dotyczy: Model 257, 290 with code 235 (Active Parking Assist with PARKTRONIC)

Niedostępne w języku „pl”; wyświetlono w języku Angielski.

Umiejscowienie

Grupa funkcyjna 2 Podwozie › 54 Instalacja elektryczna, wyposażenie i wskaźniki › 54.65 Wspomaganie parkowania — Seria 257 · Seria 290

EinPAS 28 System komfortowy/ wspomagający kierowcę › 28.15 Asystent parkowania › 28.15.12 Czujnik/ przełącznik/ wiązka przewodów — Seria 257 · Seria 290

AR54.65-P-0002FR

Remove/install Parktronic system (PTS) sensors in rear bumper

07.11.2018

Model

257, 290

with code 235 (Active Parking Assist with PARKTRONIC)

Remove/install Parktronic system (PTS) sensors in rear bumper

Shown on removed rear bumper on model 257

1

Electrical connector

2

Bracket

3

Seal

B8/7

Outer right rear parking system distance sensor

B8/8

Inner right rear parking system distance sensor

B8/9

Inner left rear parking system distance sensor

B8/10

Outer left rear parking system distance sensor

B8/11

Center left rear parking system distance sensor

B8/12

Center right rear parking system distance sensor

P54.65-6219-06

Topical note

Information on preventing damage to electronic components due to electrostatic discharge

AH54.00-P-0001-01A

Notes on safety-relevant components

AH00.00-Z-0019-01A

Remove/install

1.1

Remove appropriate rear fender liner.

Model 290
with code 235 (Active Parking Assist with PARKTRONIC)
For removal of rear parking system distance sensors (B8/7, B8/10).

AR88.10-P-1302FR

1.2

Remove rear bumper.

Model 290
with code 235 (Active Parking Assist with PARKTRONIC)
When removing the rear parking system distance sensors (B8/8, B8/9, B8/11, B8/12) or when removing all the rear parking system distance sensors (B8/7, B8/8, B8/9, B8/10, B8/11, B8/12)

AR88.20-P-2200FRX

2

Remove rear bumper.

Model 257
with code 235 (Active Parking Assist with PARKTRONIC)

AR88.20-P-2200FR

3

Disconnect electrical connector (1) from rear parking system distance sensor (B8/7, B8/8, B8/9, B8/10, B8/11, B8/12).

4

Release catch hooks of corresponding holder (2) in direction of arrow and remove rear parking system distance sensor (B8/7, B8/8, B8/9, B8/10, B8/11, B8/12) from holder.

Installation: Check relevant seal (3).

In the event of a problem,

Replace relevant seal (3).

5

Install in the reverse order

Powiązane dokumenty