ar5465p0001fr

Remove/install Parktronic system (PTS) sensors in front bumper

Typ ar · temat 54.65 · wersja 0101 · 2018-08-15

Dotyczy: Model 257, 290 with code 235 (Active Parking Assist with PARKTRONIC)

Niedostępne w języku „pl”; wyświetlono w języku Angielski.

Umiejscowienie

Grupa funkcyjna 2 Podwozie › 54 Instalacja elektryczna, wyposażenie i wskaźniki › 54.65 Wspomaganie parkowania — Seria 257 · Seria 290

EinPAS 28 System komfortowy/ wspomagający kierowcę › 28.15 Asystent parkowania › 28.15.12 Czujnik/ przełącznik/ wiązka przewodów — Seria 257 · Seria 290

AR54.65-P-0001FR

Remove/install Parktronic system (PTS) sensors in front bumper

02.08.2018

Model

257, 290

with code 235 (Active Parking Assist with PARKTRONIC)

Remove/install Parktronic system (PTS) sensors in front bumper

Shown on removed front bumper on model 257

1

Electrical connector

2

Bracket

3

Seal

B8/1

Outer left front parking system distance sensor

B8/2

Center left front parking system distance sensor

B8/3

Inner left front parking system distance sensor

B8/4

Inner right front parking system distance sensor

B8/5

Center right front parking system distance sensor

B8/6

Outer right front parking system distance sensor

P54.65-6218-06

Topical note

Information on preventing damage to electronic components due to electrostatic discharge

AH54.00-P-0001-01A

Notes on safety-relevant components

AH00.00-Z-0019-01A

Remove/install

1

Remove front bumper.

When removing front parking system distance sensor (B8/2, B8/3, B8/4, B8/5).

AR88.20-P-2000FR

2

Remove service flap at front fender liner.

When removing front parking system distance sensor (B8/1, B8/6).

3.1

Remove impact absorber from front bumper.

Model 257, 290
with code 235 (Active Parking Assist with PARKTRONIC)
except code U60 (Active Bonnet (Pedestrian protection))
When removing front parking system distance sensor (B8/2, B8/3, B8/4, B8/5).

Topical note

General information on the impact absorber

AH88.20-P-1000-01A

3.2

Remove front bumper pedestrian protection sensors together with impact absorber from front bumper.

Model 257, 290
with code 235 (Active Parking Assist with PARKTRONIC)
with code U60 (Active Bonnet (Pedestrian protection))
When removing front parking system distance sensor (B8/2, B8/3, B8/4, B8/5).

AR91.60-P-0950FR

4

Disconnect electrical connector (1) at front parking system distance sensor (B8/1, B8/2, B8/3, B8/4, B8/5, B8/6).

5

Release catch hooks of corresponding holder (2) in direction of arrow and take front parking system distance sensor (B8/1, B8/2, B8/3, B8/4, B8/5, B8/6) out of holder (2).

Installation: Check relevant seal (3).

In the event of a problem,

Replace relevant seal (3).

6

Install in the reverse order.

Powiązane dokumenty