D54.61-1175-79
Shown on model 907 with code FF8 (1-DIN slot at front under roof lining) |
1 | Disassembly clip | 3 | Equipment installation frame | |
2 | Digital tachograph | 4 | Electrical connectors (3 ea.) |
Shown on model 907 with code FE9 (1-DIN slot under cockpit, passenger side) |
1 | Disassembly clip |
2 | Digital tachograph |
D54.61-1179-11
Topical note | Information on preventing damage to electronic components due to electrostatic discharge | ||
Topical note | Notes on carrying out repair work in the vehicle interior | ||
| Remove | ||
1 | Download stored data of digital tachograph (2) using workshop card. | If the digital tachograph (2) is replaced. | |
After completion of repair work, hand over the downloaded data to the vehicle owner. | |||
2 | Insert suitable disassembly clips (1) into bores in housing of digital tachograph (2) and push in as far as the stop. | ||
3 | Pull digital tachograph (2) out of device installation frame (3) using disassembly clips (1). | ||
4 | Remove disassembly clips (1) from digital tachograph (2). | ||
5 | Disconnect electrical connectors (4) on reverse side of housing of digital tachograph (2). | ||
6 | Remove digital tachograph (2). | ||
| Install | ||
7 | Connect electrical connectors (4) on reverse side of housing of digital tachograph (2). | ||
8 | Insert digital tachograph (2) into device installation frame (3) and press in until it latches noticeably into place. | ||
| Check | ||
9 | Perform tachograph inspection. | If the digital tachograph (2) is replaced. | |
Observe national legal requirements for tachograph testing. In the Federal Republic of Germany, perform the tachograph inspection as per Art.57b of the German Regulations Authorizing the Use of Vehicles for Road Traffic (StVZO). |
Powiązane dokumenty
- ah5400p000101a Wskazówki dotyczące zapobiegania uszkodzeniom elementów elektronicznych na skutek rozładowania potencjału elektrostatycznego
- ah6800n000101s Wskazówki dotyczące wykonywania prac naprawczych we wnętrzu pojazdu