ar5430s6015ee

Remove/install instrument cluster

Typ ar · temat 54.30 · wersja 0101 · 2015-12-22

Dotyczy: Model 447.6/7, 448.7

Niedostępne w języku „pl”; wyświetlono w języku Angielski.

Umiejscowienie

Grupa funkcyjna 2 Podwozie › 54 Instalacja elektryczna, wyposażenie i wskaźniki › 54.30 Zestawł wskaźników, wskaźniki, urządzenia ostrzegawcze — Seria 447 (modele 6**, 7**) · Seria 448 (modele 7**)

EinPAS 31 Komunikacja/ informacja/ rozrywka › 31.30 Zestaw wskaźników/ komputer pokładowy › 31.30.11 Moduł sterujący/ przekaźnik — Seria 447 (modele 6**, 7**) · Seria 448 (modele 7**)

EinPAS 31 Komunikacja/ informacja/ rozrywka › 31.30 Zestaw wskaźników/ komputer pokładowy › 31.30.15 Wskazania/ wyświetlacz — Seria 447 (modele 6**, 7**) · Seria 448 (modele 7**)

AR54.30-S-6015EE

Remove/install instrument cluster

07.12.2015

Model

447.6/7, 448.7

Remove/install instrument cluster

S54.30-4570-09

1.1

Trim

2

Reset button

A1/1

Instrument cluster (KI) control unit

1.2

Steering column trim

3

Extension

Remove/install instrument cluster

4

Bolt

5

Electrical connector

6

Clamp

A1/1

Instrument cluster (KI) control unit

S54.30-4569-04

Information on preventing damage to electronic components due to electrostatic discharge

AH54.00-P-0001-01A

Notes on carrying out repair work in the vehicle interior

AH68.00-N-0001-01S

Remove/install

1

Buffer basic data of instrument cluster (KI) control unit (A1/1) in diagnostic system

When replacing instrument cluster (IC) control unit (A1/1).

AD00.00-S-2000-04E

Installation: Copy buffered basic data to new instrument cluster (IC) control unit (A1/1).

2

Move steering wheel all the way to the rear and down

Model 447.6/7
with code CL1 (Height and rake adjustable steering wheel)
Model 448.7

3

Switch off ignition and remove transmitter key

4

Mask off instrument panel in area of cover (1.1)

This is to prevent any damage when removing the cover (1.1).

5

Unclip cover (1.1) from instrument panel

Unfasten cover (1.1) only, as it has to be removed together with the steering column trim (1.2).

Installation: Make sure that the cover (1.1) and the extension (3) of the reset button (2) are seated correctly.

Long wedge

*115589035900

6

Lift up steering column trim (1.2), unclip in direction of arrow and remove with cover (1.1)

Installation: Make sure that the trim (1.2) is seated correctly.

7

Loosen screw/bolts (4)

The bolts (4) remain on the instrument cluster (IC) control unit (A1/1).

8

Unclip instrument cluster (IC) control unit (A1/1) at clips (6), and remove far enough from instrument panel to gain access to the electrical connection (5)

Installation: Check instrument cluster (IC) control unit (A1/1) is correctly seated.

9

Detach electrical connection (5) and remove instrument cluster (IC) control unit (A1/1)

10

Install in the reverse order

Check

11

Run function test of instrument cluster (IC) control unit (A1/1)

Remove/install instrument cluster

115 589 03 59 00

Long wedge

Powiązane dokumenty