1 | Steering column trim |
2 | Bolts |
3 | Bolts |
4 | Electrical connector |
5 | Clamp |
A1/1 | Instrument cluster (KI) control unit |
S54.30-4529-06
| Notes on carrying out repair work in the vehicle interior | ||
| Information on preventing damage to electronic components due to electrostatic discharge | ||
| Remove/install | ||
1 | Buffer basic data of instrument cluster (KI) control unit (A1/1) in diagnostic system | When replacing instrument cluster (IC) control unit (A1/1). | |
| |||
Installation: Copy buffered basic data to new instrument cluster (IC) control unit (A1/1). | |||
2 | Remove trim element on driver's side | ||
3 | Remove trim element on front passenger side | ||
4 | Move steering wheel all the way to the rear and down | ||
5 | Switch off ignition and remove transmitter key | ||
6 | Remove bolts (2) and detach steering column trim (1) | ||
7 | Loosen bolts (3) | Bolts (3) remain on instrument cluster (IC) control unit (A1/1). | |
8 | Unclip instrument cluster (IC) control unit (A1/1) at clips (5), and remove far enough from instrument panel to gain access to the electrical connection (4) | Installation: Check instrument cluster (IC) control unit (A1/1) is correctly seated. | |
9 | Detach electrical connection (4) and remove instrument cluster (IC) control unit (A1/1) | ||
10 | Install in the reverse order | ||
| Check | ||
11 | Run function test of instrument cluster (IC) control unit (A1/1) |
Powiązane dokumenty
- ad0000s200004e
- ah5400p000101a Wskazówki dotyczące zapobiegania uszkodzeniom elementów elektronicznych na skutek rozładowania potencjału elektrostatycznego
- ah6800n000101s Wskazówki dotyczące wykonywania prac naprawczych we wnętrzu pojazdu
- ar6810s1180e