Shown on model 177.087 |
2 | "Back" button |
3 | Finger navigation pad |
4 | Multifunction display |
P00.20-2947-06
Test image 1, target plot |
P54.33-3691-74
Test image 7, target plot |
P54.33-3532-10
Preparatory tasks | |||
1 | Park the vehicle on a horizontal, level surface. | ||
2 | Close hood, doors and trunk lid or liftgate. | ||
3 | Switch on ignition. | No fault messages must be displayed on the multifunction display. | |
4 | Set driver's seat to correct ergonomic position. | ||
5 | Activate Head-up Display. | ||
6 | Call up Workshop level in instrument cluster. | ||
| |||
7 | Swipe left on finger navigation pad (3) to select menu item "Head-up Display" in multifunction display (4) and confirm selection with finger navigation pad (3). | ||
8 | Swipe on finger navigation pad (3) to select menu item "Test image" and confirm selection. | "Off (original picture)" appears on the multifunction display (4). | |
9 | Press finger navigation pad (3) to call up list of available test images. | ||
10 | Swipe on finger navigation pad (3) to select "Test image 1" and confirm selection. | Test image 1 is shown on the windshield. | |
| Check | ||
11 | Check and assess test image 1. | The assessment must be performed by at least 2 persons. | |
If test image 1 is shown correctly, | |||
| |||
Continue with operation step 19. | |||
12 | Press finger navigation pad (3) to call up list of available test images. | ||
13 | Swipe on finger navigation pad (3) to select "Test image 7" and confirm selection. | ||
14 | Check and assess test image 7. | The assessment must be performed by at least 2 persons. | |
If test image 7 is shown correctly, | |||
| |||
Continue with operation step 19. | |||
Adjust | |||
15 | Press "Back" button (2). | ||
16 | Swipe on finger navigation pad (3) to select menu item "Parameters" and confirm selection. | ||
17 | Swipe on finger navigation pad (3) to select menu item "Warp configuration" and confirm selection. | Parameters are reset. | |
18 | Call up test image 1 and test image 7 again and assess them. | If test image 1 or test image 7 is not shown correctly, | |
| |||
Under menu item "Parameters", select individual parameters and correct as required using "SET +" and "SET -" buttons. | |||
Final activities | |||
19 | Press finger navigation pad (3) and swipe on finger navigation pad (3) to select "Off (original picture)" and confirm selection. | ||
20 | Press "Back" button (2) repeatedly until menu selection is shown in multifunction display (4) and switch off ignition. | The workshop menu can only be completed by switching off the ignition. |
Powiązane dokumenty
- ap0020p0046c Wywołanie poziomu warsztatowego w zestawie wskaźników