1 | Button "+" and "-" |
2 | "Back" button |
3 | Finger navigation pad |
4 | Instrument cluster display |
P54.30-A030-01
Set picture to center position
1 | Press "Back" button (2) repeatedly until menu selection is shown on the instrument cluster display (4). |
2 | Using wiper blade sweeps on finger navigation pad (3), select menu item "HUD" and confirm on finger navigation pad (3). |
3 | Using wiper blade sweeps on finger navigation pad (3), select menu item "Position" and confirm on finger navigation pad (3). |
4 | Using wiper blade sweeps on finger navigation pad (3), select stage "0" and confirm on finger navigation pad (3). |
Call up Workshop menu and Test image 1
5 | Press "Back" button (2) repeatedly until menu selection is shown on the instrument cluster display (4). |
6 | Using wiper blade sweeps on finger navigation pad (3), select menu item "Trip" and confirm on finger navigation pad (3). |
7 | Using wiper blade sweeps on finger navigation pad (3), select standard display "Total distance". |
8 | Press and hold "Back" (2) button for approx. 1.5 s then press the finger navigation pad (3). |
The workshop menu with the following menu items is shown on the instrument cluster display (4): |
9 | Using wiper blade sweeps on finger navigation pad (3), select menu item "Head-up Display" and confirm on finger navigation pad (3). |
10 | Using wiper blade sweeps on finger navigation pad (3), select menu item "Test image" and confirm on finger navigation pad (3). |
"Off (original picture)" appears on the instrument cluster display (4). |
11 | To make changes, press the finger navigation pad (3). |
12 | Using wiper blade sweeps on finger navigation pad (3), select "Test image 1" and confirm on finger navigation pad (3). |
Test image 1 is shown on the windshield. |
13 | Check and assess test image 1. |
The assessment must be made by at least two people. |
If test image 1 is shown correctly, | |
| |
|
Press finger navigation pad (3). Using wiper blade sweeps on finger navigation pad (3) select "Off (original picture)". Press on finger navigation pad (3) again. Press "Back" button (2) repeatedly until menu selection is shown on the instrument cluster display (4). Switch off ignition. |
The workshop menu can only be completed by switching off the ignition. |
If test image 1 is not shown correctly, | |
| |
Continue with operation step 14. |
14 | To make changes, press the finger navigation pad (3). |
15 | Using wiper blade sweeps on finger navigation pad (3), select "Test image 7" and confirm on finger navigation pad (3). |
P54.33-3691-74
16 | Check and assess test image 7. |
The assessment must be made by at least two people. |
If test image 7 is shown correctly, | |
| |
|
Press finger navigation pad (3). Using wiper blade sweeps on finger navigation pad (3) select "Off (original picture)". Press on finger navigation pad (3) again. Press "Back" button (2) repeatedly until menu selection is shown on the instrument cluster display (4). Switch off ignition. |
The workshop menu can only be completed by switching off the ignition. |
If test image 7 is not shown correctly, | |
| |
Continue with operation step 17. |
If test image 7 was not correctly shown the parameters in the Workshop menu must be reset. |
P54.33-3532-10
Examples for incorrectly shown test image 7
P54.33-3533-10
P54.33-3534-10
P54.33-3535-10
P54.33-3536-10
P54.33-3537-10
P54.33-3538-12
P54.33-3539-10
Reset parameters in workshop menu
17 | Press "Back" button (2). |
18 | Using wiper blade sweeps on finger navigation pad (3), select menu item "Parameters" and confirm on finger navigation pad (3). |
19 | Using wiper blade sweeps on finger navigation pad (3), select menu item "Warp configuration" and confirm on finger navigation pad (3). |
Parameters are reset. |
20 | Call up test image 1 and test image 7 again and assess them. |
If test image 1 and test image 7 are shown correctly, |
|
|
Press finger navigation pad (3). Using wiper blade sweeps on finger navigation pad (3) select "Off (original picture)". Press on finger navigation pad (3) again. Press "Back" button (2) repeatedly until menu selection is shown on the instrument cluster display (4). Switch off ignition. |
The workshop menu can only be completed by switching off the ignition. |
If test image 1 or test image 7 is not shown correctly, |
|
In the "Parameters" menu item, select the individual parameters and correct accordingly using the "+" and "-" button (1). |