P54.25-3606-06
1 Front bracket
2 Bracket
3 Positive terminal cover
4 Cable
N10/10 SAM control unit
| Remove/Install | ||
1 | Disconnect ground cable of battery | ||
2 | Remove tie strap from front of bracket (1) | Installation: replace tie straps. | |
3 | Release SAM control unit (N10/10) from front of bracket (1) | ||
4 | Release lock from bracket (2) | ||
5 | Push SAM control unit (N10/10) upwards out of hinge guides | ||
6 | Remove positive pole cover (3), unscrew nut under it and remove line (4) | ||
7 | Detach all plugs | ||
8 | Remove SAM control unit (N10/10) | ||
9 | Install in the reverse order |