S54.21-4746-09
1 | Multifunction camera | 4 | Electrical connector | |
2 | Cover | 5 | Cutouts | |
3 | Catch hook | 6 | Guide |
Topical note | Information on preventing damage to electronic components due to electrostatic discharge | ||
Topical note | Notes on carrying out repair work in the vehicle interior | ||
| Remove/install | ||
1 | Switch off ignition and store transmitter key outside of transmission range (min. 2 m). | ||
2 | Remove cover (2). | Cover (2) is secured with 4 clamps. | |
Long wedge | |||
3 | Release multifunction camera (1) from catch hook (3) and remove until the electrical connector (4) is accessible. | | |
Installation: The guides (6) of the multifunction camera (1) must first be inserted into the notches (5) before the multifunction camera (1) can be locked at the catch hooks (3). | |||
4 | Disconnect electrical connector (4) and remove multifunction camera (1). | ||
5 | Install in the reverse order | ||
6 | Calibrate multifunction camera (1). | If the multifunction camera (1) was replaced. | |
| |||
| 470 588 02 23 00 Adjusting gauge | ||
WIS Service Media |
115 589 03 59 00
Long wedge
Powiązane dokumenty
- ad0000s200006p
- ah5400p000101a Wskazówki dotyczące zapobiegania uszkodzeniom elementów elektronicznych na skutek rozładowania potencjału elektrostatycznego
- ah6800n000101s Wskazówki dotyczące wykonywania prac naprawczych we wnętrzu pojazdu
- ws5400n0058b