ar5421p3000fr

Remove/install multifunction camera

Typ ar · temat 54.21 · wersja 0201 · 2019-09-20

Dotyczy: Model 257, 290 with code 233 (Adaptive cruise control Plus (DISTRONIC PLUS)) Model 257, 290 with code 239 (Adaptive cruise control Pro (DISTRONIC PRO)) with code 51B (Rating, country group EURO-NCAP) Model 257, 290 with code 243 (Active Lane Keeping Assist (camera)) Model 257, 290 with code 258 (Active Brake Assist System) with code 51B (Rating, country group EURO-NCAP) Model 257, 290 with code 266 (DISTRONIC PLUS with Cross-Traffic Assist (DTR+Q)) Model 257, 290 with code 504 (Speed sign recognition) Mo

Niedostępne w języku „pl”; wyświetlono w języku Angielski.

Umiejscowienie

Grupa funkcyjna 2 Podwozie › 54 Instalacja elektryczna, wyposażenie i wskaźniki › 54.21 Moduły sterujące / moduły — Seria 257 · Seria 290

EinPAS 36 Widoczność › 36.25 System kamery › 36.25.11 Moduł sterujący/ przekaźnik — Seria 257 · Seria 290

EinPAS 36 Widoczność › 36.25 System kamery › 36.25.30 Kamera obszaru zewnętrznego — Seria 257 · Seria 290

AR54.21-P-3000FR

Remove/install multifunction camera

18.09.2019

Model

257, 290

with code 233 (Adaptive cruise control Plus (DISTRONIC PLUS))

Model

257, 290

with code 239 (Adaptive cruise control Pro (DISTRONIC PRO))

with code 51B (Rating, country group EURO-NCAP)

Model

257, 290

with code 243 (Active Lane Keeping Assist (camera))

Model

257, 290

with code 258 (Active Brake Assist System)

with code 51B (Rating, country group EURO-NCAP)

Model

257, 290

with code 266 (DISTRONIC PLUS with Cross-Traffic Assist (DTR+Q))

Model

257, 290

with code 504 (Speed sign recognition)

Model

257, 290

with code 513 (Road sign recognition system)

Model

257, 290

with code 608 (Automatic high beam control (IHC))

Model

257, 290

with code 628 (INTELLIGENT HEADLAMP CONTROL PLUS (IHC+))

Modification notes

26.04.2019

Commissioning added.

Operation step 1.

Remove/install multifunction camera

P54.21-3903-08

Shown on model 257 with code 608 (Adaptive Highbeam Assist)

1

Electrical connector

2

Stereo multifunction camera

Topical note

Information on preventing damage to electronic components due to electrostatic discharge

AH54.00-P-0001-01A

Remove/install

1

Commission mono multifunction camera or stereo multifunction camera (2).

If mono multifunction camera or stereo multifunction camera (2) was replaced.

AD00.00-P-2000-06FR

000 588 11 21 00 Adjustment device

WS82.00-P-0151B

000 588 00 23 00 Adjusting gauge

WS82.00-P-0028B

2

Switch off ignition and store transmitter key outside of transmission range (min. 2  m).

3

Remove cover over mono multifunction camera or stereo multifunction camera (2).

4

Pull mono multifunction camera or stereo multifunction camera (2) towards rear and remove far enough until electrical connector (1) is accessible.


The lens of the mono multifunction camera or stereo multifunction camera (2) must not be touched.
Otherwise, this can result in malfunctions.

5

Disconnect electrical connector (1) and remove mono multifunction camera or stereo multifunction camera (2).

6

Install in the reverse order.

7

Calibrate mono multifunction camera or stereo multifunction camera (2).

If mono multifunction camera or stereo multifunction camera (2) was reused.

AD00.00-P-2000-06FR

000 588 11 21 00 Adjustment device

WS82.00-P-0151B

000 588 00 23 00 Adjusting gauge

WS82.00-P-0028B

Powiązane dokumenty