Remove/install rear central control unit

AR54.21-P-1273EQ

Remove/install rear central control unit

15.03.2019

Model

293

1

Nut

N10/8

Rear central control unit

 Warning

Risk of injury caused by fingers being jammed or pinched when removing, installing or aligning hoods, doors, trunk lid/rear-end door or sliding roof.

No parts of the body or limbs should be within the operating area when the components are moving.

AS00.00-Z-0011-01A

Topical note

Information on preventing damage to electronic components due to electrostatic discharge

AH54.00-P-0001-01A

Notes on safety-relevant components

AH00.00-Z-0019-01A

Notes on HANDS-FREE ACCESS

AH80.61-P-0001-01A

 

Remove/install

1

Perform commissioning of rear central control unit (N10/8).

When replacing rear central control unit (N10/8).



AD00.00-P-2000-06FR

2

Switch off ignition and store transmitter key outside of transmission range (min. 2  m).

3

Remove right load compartment cover.

AR68.30-P-1180LWG

4

Disconnect all electrical connectors from rear central controller unit (N10/8).

 The electrical connections are coded and cannot be interchanged.
The number of electrical connectors may vary depending on the equipment.

5

Remove nut (1).

6

Remove rear central control unit (N10/8) in upward direction.

7

Install in the reverse order.