AR54.20-P-2351CS | Removing and installing blower motor for control module box | 17.6.98 |
MODEL 129 as of 1.9.95
P54.20-2009-06
1 Hose
2 Heated window thermo valve
3 Screws
4 Protective housing
M2/2 Control module box blower motor
| Removal, installation | ||
1 | Remove cover in engine compartment on right | ||
2 | Remove dust filter | ||
3 | Unclip hose (1) from control module box blower motor (M2/2) and unclip from air intake housing and remove | ||
4 | Unclip heated window thermo valve (2) from air intake housing | ||
5 | Unscrew screws (3) | ||
6 | Remove control module box blower motor (M2/2) together with protective housing (4) from control module box | ||
7 | Unclip electrical connector from protective housing (4) | ||
8 | Remove control module box blower motor (M2/2) with protective housing (4) from component compartment | ||
9 | Install in the reverse order |