P54.20-0237-06
1 Screws
2 Cover
3 Nuts
4 Clamping screw
5 Gasket
F23/1 Control module box
K40 Relay module (HFM-SFI, HFM-SFI with air pump, ME-SFI 1.0, EDC, base function)
M2/2 Module box blower motor
N3/4 Engine control module
N10-3 Multi-function control module
(Convenience feature CF, wiper system, rear window defroster, box blower)
N47 Traction system control module
| Removal, installation | ||
1 | Disconnect ground lead from battery | ||
2 | Unscrew screws (1) and remove cover (2) | Installation: Check condition and seat of cover gasket and replace, if necessary | |
3 | Remove control modules from control module box (F23/1) | Engine control module (N3/4), relay module (K40), multi-function control module (N10-3), traction system control module (N47) | |
4 | Remove module box blower motor (M2/2) | ||
5 | Remove cover below instrument panel (passenger side) | ||
6 | Carefully pull connection leads for control modules out into passenger footwell or component compartment | Disconnect wire passages to component compartment in control module box (F23/1). Disconnect inseparable wires such as electronic transmission control (ETC) at foot plate in passenger footwell | |
7 | Remove nuts (3) and remove control module box (F23/1) from component compartment | Installation: Check condition and seat of gasket for control module box (F23/1) and replace, if necessary | |
8 | Reinstall in opposite order |
Powiązane dokumenty
- ar5410p0003a Odłączanie i przyłączanie przewodu masowego akumulatora
- ar5420p125701c
- ar6810p1520g