ar5410s112901e

Check battery

Typ ar · temat 54.10 · wersja 0102 · 2015-12-22

Dotyczy: Model 447, 448

Niedostępne w języku „pl”; wyświetlono w języku Angielski.

Umiejscowienie

Grupa funkcyjna 2 Podwozie › 54 Instalacja elektryczna, wyposażenie i wskaźniki › 54.10 Akumulator, zasilanie, przetwornik napięcia — Seria 447 · Seria 448

EinPAS 25 Instalacja elektryczna/sieć wymiany danych/wielofunkcyjne › 25.20 Sieć pojazdu › 25.20.20 Akumulator — Seria 447 · Seria 448

AR54.10-S-1129-01E

Check battery

000 588 02 19 00 Battery tester

WS54.00-N-3006B

Model

447, 448

Do not connect battery tester to jump start or charging terminal point when the battery is installed; always connect it directly to the battery.
Otherwise the test result may be incorrect.

All test steps and entries must be conducted painstakingly.
Otherwise the test result may be incorrect.

Whenever possible, perform the tests with the battery still installed and connected.

1

Switch off ignition.

2

Switch off interior and exterior lights.

3

Switch off audio component (e.g. radio).

4

Connect battery tester to battery.

Check battery tester is securely connected to battery.
Otherwise the test result may be incorrect.

Once the battery tester has been connected the currently measured battery voltage is displayed.
During the test procedure, the battery tester may detect so-called "system noise".
In this instance, check whether all consumers are switched off and wait approx. 2 minutes until the quiescent current is minimized and the bus systems are shut down.

5.1

If battery installed, when the "Surface voltage" message is shown during the test.
Reduce increased voltage as per the battery tester specifications (e.g. switch on driving lights).

5.2

If battery removed, when the "Surface voltage" message is shown during the test.
Reduce increased voltage using a suitable load tester (load battery for approx. 60 s with 20 A to 30 A).

6

Conduct test procedure to match the battery tester menu navigation.

7

After the test print out the test code displayed and store it safely in a tamperproof manner.