Remove/install park pawl capacitor

AR54.10-P-1126RFW

Remove/install park pawl capacitor

07.09.2018

Model

253.992/993

2

Floor covering

3

Nuts

4

Footrest

5

Electrical connector

6

Nut

C8

Park pawl capacitor

 Danger

Risk of explosion caused by escaping hydrogen or overheating of the fuel tanks when working on the hydrogen system. Risk of frostbite to body parts caused by escaping gas and by touching component parts carrying gas when emptying fuel tanks. Risk of asphyxiation caused by inhalation of air diluted by hydrogen. Risk of burn injuries by coming into contact with an invisible pale blue hydrogen flame.

AS00.00-Z-0030-01B

Topical note

Information on preventing damage to electronic components due to electrostatic discharge

AH54.00-P-0001-01A

Topical note

Notes on fuel cell system

AH00.00-P-0022-01RFW

Notes on safety-relevant components

AH00.00-Z-0019-01A

 

Remove/install

1

Ensure that the requirements for driving into the workshop are fulfilled.

Topical note

Requirements for driving into the workshop

AH00.00-P-0021-01RFW

2

Print out the "Protokoll Tanksystem, Formular" (tank system event log form), fill it out, and attach to the vehicle in a place where it is easily visible.



OF00.00-P-3000-21RFW

3

Switch off ignition and store transmitter key outside of transmitter range (min. 2 m).

4

Remove floor covering (2) from front passenger footwell.

Model 253.992/993 2#

AR68.20-P-2050LW

Model 253.992/993 1#

AR68.20-P-2070LW

5

Unscrew nuts (3).

6

Remove footrest (4).

7

Disconnect electrical connector (5).

8

Unscrew nut (6) and unhook park pawl condenser (C8) from bracket and remove.

9

Install in the reverse order.