ar5410d1300ts

Remove/install voltage converter

Typ ar · temat 54.10 · wersja 0101 · 2019-11-28

Dotyczy: Model 907, 910

Niedostępne w języku „pl”; wyświetlono w języku Angielski.

Umiejscowienie

Grupa funkcyjna 2 Podwozie › 54 Instalacja elektryczna, wyposażenie i wskaźniki › 54.10 Akumulator, zasilanie, przetwornik napięcia — Seria 907 · Seria 910

EinPAS 25 Instalacja elektryczna/sieć wymiany danych/wielofunkcyjne › 25.20 Sieć pojazdu › 25.20.42 Przetwornik napięcia — Seria 907 · Seria 910

AR54.10-D-1300TS

Remove/install voltage converter

27.11.2019

Model

907, 910

Remove/install voltage converter

Shown on model 907 with code G42 (7G-TRONIC PLUS)

1

Voltage converter

2

Retaining tabs

3

Bracket

4

Electrical connectors

D54.10-1208-06

Danger

Risk of death when working on component parts and systems with U >= 30 V alternating voltage (AC) or U >= 60 V direct voltage (DC)

Do not touch damaged or defective live component parts and lines or non-insulated electrical connections and lines.

AS00.00-Z-0035-01A

Topical note

Information on preventing damage to electronic components due to electrostatic discharge

AH54.00-P-0001-01A

Topical note

Notes on carrying out repair work in the vehicle interior

AH68.00-N-0001-01S

Remove/install

1

Detach ground line of on-board electrical system battery.

AR54.10-D-0029TS

2

Remove lower center stowage compartment at instrument panel.

AR68.10-D-1513TS

3

Release voltage converter (1) at retaining tabs (2) and remove from holder (3) until the electrical connectors (4) are accessible.

4

Disconnect electrical connectors (4) and remove voltage converter (1).

5

Install in the reverse order.

Check

6.1

Perform function test of 230 V socket.

Model 907, 910
with code EE1 (230 V socket)

6.2

Perform function test of 115 V socket.

Model 907.1/6/7
with code EE3 (115 V socket)

Powiązane dokumenty