D54.10-1216-79
1 | Cigarette lighter | 6 | Spring pin | |
2 | Pliers | 7 | Catch hook | |
3 | Housing | 8 | Stowage compartment | |
4 | Electrical connector | 9 | Cover | |
5 | Insert |
Topical note | Notes on carrying out repair work in the vehicle interior | ||
| Remove/install | ||
1 | Switch off ignition and store transmitter key outside of transmission range (min. 2 m). | ||
2 | Remove stowage compartment (8). | ||
3 | Disconnect electrical connection (4). | ||
4 | Remove insert (5) from housing (3). | ||
5 | Release housing (3) with pliers (2) and remove from clamping sleeve (6). | The studs of the pliers (2) must engage in the cutouts of the housing (3) (arrows A). | |
Pliers | |||
6 | Release clamping sleeve (6) at the two catch hooks (7) and remove from trim (9). | Installation: Observe correct installation position of clamping sleeve (6). | |
7 | Install in the reverse order. | ||
| Check | ||
8 | Carry out function test of cigarette lighter (1). |
169 589 00 37 00
Pliers
Powiązane dokumenty
- ah6800n000101s Wskazówki dotyczące wykonywania prac naprawczych we wnętrzu pojazdu
- ar6810d1513ts