Remove/install battery sensor

AR54.10-D-0002TS

Remove/install battery sensor

08.01.2020

Model

907, 910

Shown on model 907

1

Battery sensor

2

Electrical connector

3

Ground cable

4

Cover

Shown on model 910

3

Ground cable

4

Cover

5

Cover

 Danger

Risk of fire/risk of explosion due to short circuit and escaping oxyhydrogen gas. Risk of (burn) injury caused by caustic burns to eyes, skin and mucous membranes from battery electrolyte/mist, short circuit and arcing. Risk of poisoning caused by swallowing battery electrolyte or absorption of lead through the skin or body orifices. Risk of death due to voltage U >= 30 V AC and U >= 60 V DC.

No fires, sparks, open flames, or smoking. Wear acid-resistant gloves, clothing, and glasses. Pour battery acid only into suitable and appropriately marked containers.

AS54.10-Z-0001-01A

Topical note

Notes on carrying out repair work in the vehicle interior

AH68.00-N-0001-01S

Topical note

Information on preventing damage to electronic components due to electrostatic discharge

AH54.00-P-0001-01A

Topical note

Notes on battery

AH54.10-P-0001-01A

 

Remove/install

1

Move driver seat to rearmost position.

2

Disconnect ground line of on-board electrical system battery at body floor.

AR54.10-D-0029TS

3

Disconnect ground line at negative pole of on-board electrical system battery.

Model 907

AR54.10-D-0009TSR

Model 910

AR54.10-D-0009TSF

4

Disconnect electrical connection (2).

5

Remove cover (5).

Model 910

6

Pull out ground line (3) under trim (4) and remove with battery sensor (1).

 The ground line (3) and the battery sensor (1) cannot be individually replaced.

7

Install in the reverse order.