1 | Multipoint connector |
2 | Electrical connectors |
N141 | AdBlue®(SCR) control unit |
S49.20-A100-76
Topical note | Notes on carrying out repair work in the vehicle interior | ||
Topical note | Information on preventing damage to electronic components due to electrostatic discharge | ||
| Remove/install | ||
1 | Clamp off ground line of on-board electrical system battery (G1). | ||
2 | Remove lighting switch (S1) and place to one side with connected electrical lines. | ||
| |||
3 | Unclip light switch module panel and place to one side with electrical lines connected. | | |
4 | Unclip multipoint connector (1) and place to one side with electrical lines connected. | | |
5 | Release and disconnect electrical connectors (2). | ||
6 | Unclip AdBlue® control unit (SCR) (N141) and remove it carefully. | ||
7 | Install in the reverse order. | ||
Initial startup | |||
8 | Commission the AdBlue® control unit (SCR) (N141). | When replacing AdBlue® control unit (SCR) (N141). | |
Powiązane dokumenty
- ah5400p000101a Wskazówki dotyczące zapobiegania uszkodzeniom elementów elektronicznych na skutek rozładowania potencjału elektrostatycznego
- ah6800n000101s Wskazówki dotyczące wykonywania prac naprawczych we wnętrzu pojazdu
- ar5410s0003e
- ar5410s0003e
- ar5421s0015e Kodowanie SCN modułów sterujących
- ar5425s3250e