ar4920s0015eh

Remove/install sensor unit of temperature sensors

Typ ar · temat 49.20 · wersja 0100 · 2019-09-17

Dotyczy: Engine 622.8 in model 447

Niedostępne w języku „pl”; wyświetlono w języku Angielski.

Umiejscowienie

Grupa funkcyjna 1 Silnik › 49 Układ wydechowy, układ oczyszczania spalin › 49.20 System oczyszczania spalin — Seria 447 · Seria 622 (modele 8**)

EinPAS 15 Silnik › 15.40 Układ wydechowy/ układ oczyszczania spalin › 15.40.12 Czujnik/ przełącznik/ wiązka przewodów — Seria 447 · Seria 622 (modele 8**)

AR49.20-S-0015EH

Remove/install sensor unit of temperature sensors

02.09.2019

Engine

622.8 in model 447

Remove/install sensor unit of temperature sensors

S49.20-A079-78

1

Bolts

B19/8

Temperature sensor downstream of oxidation catalytic converter

2

Bracket

B19/11

Temperature sensor upstream of turbocharger

B16/10

High-pressure exhaust gas recirculation temperature sensor

B175

Temperature sensors sensor unit

B16/19

Exhaust gas temperature sensor upstream of diesel particulate filter (DPF)

Warning

Risk of burn injuries, suffocation and poisoning when working on the exhaust system and the components connected to it. Risk of suffocation and risk of poisoning caused by inhalation of gaseous and solid components of the exhaust. Risk of poisoning caused by skin contact with solid components of the exhaust.

Wear protective clothing and safety glasses. Use the extraction system. Move people out of the hazard area.

AS49.00-Z-0001-01A

Warning

Risk of injury. Skin or eye injuries may result when handling hot or glowing objects.

Wear protective gloves, protective clothing and safety glasses, if necessary.

AS00.00-Z-0002-01A

Caution

Risk of injury caused by scraping or cutting body parts on sharp vehicle parts

Always wear protective gloves when working on or near sharp and non-deburred vehicle parts.
Deburr repair panels.

AS00.00-Z-0017-01A

Topical note

Notes on avoiding damage through contamination and foreign objects

AH00.00-P-5000-01A

Topical note

Information on preventing damage to electronic components due to electrostatic discharge

AH54.00-P-0001-01A

Remove/install

1

Switch off ignition and store transmitter key outside of transmitter range (min. 2 m).

2

Remove cover of cylinder head cover.

AR01.20-S-5015EH

3

Remove high-pressure exhaust gas recirculation temperature sensor (B16/10).

Temperature sensor to SCR catalytic converter/exhaust gas turbocharger/exhaust manifold/valve housing

*BA07.04-P-1008-02C

Box wrench socket

*000589770300

4

Release electrical wiring harness for high-pressure exhaust gas recirculation temperature sensor (B16/10) from retaining clips (2).

5

Remove exhaust gas temperature sensor upstream of diesel particulate filter (DPF) (B16/19).

Temperature sensor to SCR catalytic converter/exhaust gas turbocharger/exhaust manifold/valve housing

*BA07.04-P-1008-02C

Box wrench socket

*000589770300

6

Release electrical wiring harness for exhaust gas temperature sensor upstream of diesel particulate filter (DPF) (B16/19) from retaining clips (2).

7

Raise vehicle.

AR00.60-S-1000E

8

Remove temperature sensor upstream of exhaust gas turbocharger (B19/11).

Temperature sensor to SCR catalytic converter/exhaust gas turbocharger/exhaust manifold/valve housing

*BA07.04-P-1008-02C

Box wrench socket

*000589770300

9

Release electrical wiring harness for temperature sensor upstream of exhaust gas turbocharger (B19/11) from retaining clips (2).

10

Remove temperature sensor downstream of oxidation catalytic converter (B19/8).

Temperature sensor to SCR catalytic converter/exhaust gas turbocharger/exhaust manifold/valve housing

*BA07.04-P-1008-02C

Box wrench socket

*000589770300

11

Release electrical wiring harness for temperature sensor downstream of oxidation catalytic converter (B19/8) from retaining clips (2).

12

Lower vehicle.

AR00.60-S-1000E

13

Remove screws (1) from temperature sensor control unit (B175).

Bolt, sensor unit for temperature sensors to holder

*BA07.04-P-1007-02C

14

Remove temperature sensor control unit (B175) with sensors.

15

Install in the reverse order.

Check

Warning

Risk of accident from vehicle starting off by itself when engine running. Risk of injury (bruises and burns) resulting from working on the engine while it is being started or when it is running.

Secure vehicle to prevent it from starting off by itself. Wear closed and snug-fitting work clothes. Do not touch hot or rotating parts.

AS00.00-Z-0005-01A

16

Perform engine test run. While doing so, check engine for proper operation and leak tightness.

Sensors

Number

Designation

Engine 622.8 in model 447

BA07.04-P-1007-02C

Bolt, sensor unit for temperature sensors to holder

Nm

10

Sensors

Number

Designation

Engine 622.8 in model 447

BA07.04-P-1008-02C

Temperature sensor to SCR catalytic converter/exhaust gas turbocharger/exhaust manifold/valve housing

Nm

32

Remove/install sensor unit of temperature sensors

000 589 77 03 00

Box wrench socket

Powiązane dokumenty