ar4920g1090ch

Remove/install magnetic adapter at filler neck of AdBlue(R) tank

Typ ar · temat 49.20 · wersja 0101 · 2018-08-11

Dotyczy: Engine 457.9, 458.9, 541.9, 542.9, 941.9, 942.9 in model 000.001 with BlueTec

Niedostępne w języku „pl”; wyświetlono w języku Angielski.

Umiejscowienie

Grupa funkcyjna 1 Silnik › 49 Układ wydechowy, układ oczyszczania spalin › 49.20 System oczyszczania spalin — Seria 000 (modele 001) · Seria 942 (modele 9**)

EinPAS 15 Silnik › 15.40 Układ wydechowy/ układ oczyszczania spalin › 15.40.53 Zbiornik/urządzenie do napełniania — Seria 000 (modele 001) · Seria 942 (modele 9**)

Dotyczy też silników/skrzyń biegów: 457 9**, 458 9**, 541 9**, 542 9**, 941 9**

AR49.20-G-1090CH

Remove/install magnetic adapter at filler neck of AdBlue(R) tank

10.08.2018

Engine

457.9, 458.9, 541.9, 542.9, 941.9, 942.9 in model 000.001

with BlueTec

Remove/install magnetic adapter at filler neck of AdBlue(R) tank

W14.40-1472-08

1

Holes

4

Screwdriver

7

Magnetic adapter

2

Fastening hook

5

Assembly aid

3

Cover

6

AdBlue® tank

Warning

Risk of burn injuries and scalding when working at AdBlue lines and the components attached to them. Risk of injury to skin and eyes when handling AdBlue. Risk of poisoning caused by swallowing AdBlue

Pour AdBlue into suitable containers only. Wait until the pressure is released before starting any work on the exhaust aftertreatment system.

AS14.40-Z-0001-01A

Notes on use, material properties and handling of AdBlue®

AH14.40-N-0001-01A

Remove

1

Unscrew cap (3) of the AdBlue® container (6).

2

Insert assembly aid (5) into the bores (1).

Assembly aid for removal/installation of magnetic adapter at AdBlue(R) tank filler neck

WF58.50-W-1440-01A

3

With two screwdrivers (4), press the fastening hooks (2) inward in the direction of the arrow and displace assembly aid (5) up to the end stop.

4

Pull out magnetic adapter (7).

Install

5

Press together the fastening hooks (2) by hand and insert assembly aid (5) up to end stop into the bores (1).

Assembly aid for removing/installing the magnet adapters on the filler neck of the AdBlue® container

WF58.50-W-1440-01A

6

Insert magnetic adapter (7) up to end stop into the filler neck of the AdBlue® container (6).

7

Hold magnetic adapter (7) and pull out assembly aid (5).

When pulling out the assembly aid (5), the fastening hooks (2) engage audibly.

8

Screw on cap (3) of the AdBlue® container (6).

Powiązane dokumenty