P49.10-2445-06
1 Clamp
2 Exhaust flex pipe
3 Catalytic converter
4 Clamp
5 Retaining rubber
| Remove/install | ||
Danger! | Risk of death caused by vehicle slipping or toppling off of the lifting platform. | Align vehicle between the columns of the lifting platform and position the four support plates below the lifting platform support points specified by the vehicle manufacturer. | |
1 | Raise vehicle | ||
2 | Loosen clamps (1, 4) | | |
| |||
3 | Unclip retaining rubbers (5) | Installation: Check retaining rubbers (5), replace if necessary | |
4 | Take out exhaust flex pipe (2) | Installation: Clean sealing surfaces. | |
5 | Install in the reverse order | ||
Danger! | Risk of accident caused by vehicle starting off by itself when engine is running. Risk of injury caused by contusions and burns during starting procedure or when working near the running engine | Secure vehicle to prevent it from moving by itself. | |
6 | Conduct engine test run and check exhaust system around the exhaust flex pipe (2) for leaks |
Exhaust system
Powiązane dokumenty
- as0000z000501a Niebezpieczeństwo wypadku na skutek samoczynnego ruszenia przy pracującym silniku. Niebezpieczeństwo obrażeń na skutek zmiażdżenia lub poparzenia przy wykonywaniu czynności podczas rozruchu lub przy pracującym silniku.
- as0000z001001a Zagrożenie życia na skutek ześlizgnięcia lub spadnięcia pojazdu z podnośnika.