AR49.10-D-7140NA | Remove/install exhaust system | 16.1.01 |
ENGINE 612.981 in MODEL WD1, WD2, WD3, WD6, WD7, XD1, XD2, XD3, XD4, XD5, XD6, XD7, YD1, YD2, YD3, YD4, YD5, YD6, YD7
ENGINE 647.981 in MODEL WD1, WD2, WD3, WD6, WD7, XD1, XD2, XD3, XD4, XD5, XD6, XD7, YD1, YD2, YD3, YD4, YD5, YD6, YD7
ENGINE 612.981 in MODEL 903.61 /66 /67, 904.61 /66 with CODE (ZU7) National version for Canada
ENGINE 612.981 in MODEL 903.61 /66 /67, 904.61 /66 with CODE (ZU8) National version for USA
ENGINE 612.981 in MODEL 903.61 /62 /66 /67, 904.61 /62 /66 with CODE (ZU9) National version for Mexico
ENGINE 647.981 in MODEL 903.61 /66 /67, 904.61 /66 with CODE (ZU7) National version for Canada
ENGINE 647.981 in MODEL 903.61 /66 /67, 904.61 /66 with CODE (ZU8) National version for USA
ENGINE 647.981 in MODEL 903.61 /62 /66 /67, 904.61 /62 /66 with CODE (ZU9) National version for Mexico
D49.10-1108-06
Shown on exhaust system for
engine 612.981
1 Heat shield
2 Clip
3 Nut
4 Bracket
5 Screw
6 Exhaust pipe
7 Exhaust muffler with catalytic converter
8 Clip
9 Rubber hanger
10 Turbocharger
11 Exhaust pipe (only on long wheelbase models)
| Remove/Install | ||
Installation | Replace self-locking nuts | ||
1 | Remove heat shield (1) | ||
2 | Take off clip (2) at turbocharger (10) | Installation: Inspect condition of clamp (2) and replace where necessary. | |
3 | Unscrew nuts (3) at bracket (4) | ||
4 | Unscrew bolt (5) at front exhaust hanger | ||
5 | Release exhaust system from the rubber hangers (9) and take off complete | Installation: Inspect condition of rubber hangers (9), install new parts if necessary. | |
6.1 | Separate exhaust pipe (6), muffler with catalytic convertor (7), or exhaust pipe (11) | Only where a component part of the exhaust system is replaced. Exhaust pipe (11) is fitted only to long wheelbase models. | |
Installation: Inspect condition of clamps (8) and replace where necessary. | |||
7 | Install in the reverse order |