ar4750p0110msa

Remove/install fuel level sensor

Typ ar · temat 47.50 · wersja 0101 · 2018-11-06

Dotyczy: Engine 256.9 in model 213, 238, 257, 290

Niedostępne w języku „pl”; wyświetlono w języku Angielski.

Umiejscowienie

Grupa funkcyjna 1 Silnik › 47 Układ paliwowy, zasilanie energią zespołu napędowego › 47.50 Czujniki — Seria 213 · Seria 238 · Seria 257 · Seria 290

EinPAS 16 Zasilanie paliwem/ energią silnika › 16.10 Zasilanie paliwem › 16.10.12 Czujnik/ przełącznik/ wiązka przewodów — Seria 213 · Seria 238 · Seria 257 · Seria 290

Dotyczy też silników/skrzyń biegów: 256 9**

AR47.50-P-0110MSA

Remove/install fuel level sensor

23.10.2018

Engine

256.9 in model 213, 238, 257, 290

Remove/install fuel level sensor

2

Holding bridges

3

Swirl pot

B4/2

Fuel tank fuel level indicator fill level sensor, right

P47.50-2141-05

Danger

Risk of explosion caused by fuel igniting, risk of poisoning caused by inhaling and swallowing fuel as well as risk of injury to eyes and skin caused by contactwith fuel.

No fires, sparks, open flames or smoking. Pour fuels into suitable and appropriately marked containers only.
Wear protective clothing when handling fuel.

AS47.00-Z-0001-01A

Caution

Risk of injury caused by scraping or cutting body parts on sharp vehicle parts

Always wear protective gloves when working on or near sharp and non-deburred vehicle parts.
Deburr repair panels.

AS00.00-Z-0017-01A

Topical note

Notes on avoiding damage through contamination and foreign objects

AH00.00-P-5000-01A

Remove/install

1

Remove fuel pump.

AR47.20-P-5710MSA

2

Unclip holding clamp (2) at swirl pot (3) and place with clipped in lines to one side.

3

Unclip right fuel tank fuel level indicator fill level sensor (B4/2) at swirl pot (3) and remove.

4

Install in the reverse order.

Powiązane dokumenty