P47.30-2155-04
1 Electrical connector
2 Purge line
3 Bolts
4 Hose clamp
Y58 Fuel tank vent valve
| Remove/install | ||
1.1 | Remove throttle valve actuator | For engine 132.910 | |
1.2 | Releasing and positioning the rear drive module | For engine 132.930 | |
2 | Disconnect electrical connector (1) at tank vent valve (Y58) | ||
3 | Remove bolts (3) | ||
4 | Loosen clamp (4) and detach purge line (2) from tank vent valve (Y58) | Installation: Replace clamp (4). | |
5 | Pull out tank vent valve (Y58) | Installation: Check sealing ring and replace if necessary. | |
6 | Install in the reverse order | ||
7 | Read fault memory, erase if necessary | When installing a new tank vent valve (Y58). | |
| Connect STAR DIAGNOSIS and read out fault memory |