Remove/ install activated charcoal canister

AR47.30-P-8212MNB

Remove/ install activated charcoal canister

29.11.2019

Model

190 with engine 178

Shown on model 190 without code 494 (USA version)

1

Activated charcoal canister

2

Clamps

3

Lines

Shown on model 190 without code 494 (USA version) from modification year 2019

1

Activated charcoal canister

3

Lines

2

Clamps

6

Retaining clamp

Shown on model 190 with code 494 (USA version)

1

Activated charcoal canister

4

Clutch

2

Clip

5

Electrical connector

3

Lines

6

Retaining clamp

 Danger

Risk of explosion caused by fuel igniting, risk of poisoning caused by inhaling and swallowing fuel as well as risk of injury to eyes and skin caused by contactwith fuel.

No fires, sparks, open flames or smoking. Pour fuels into suitable and appropriately marked containers only.
Wear protective clothing when handling fuel.

AS47.00-Z-0001-01A

 

Remove/install

1

Remove rear left fender liner.

AR88.10-P-1400RG

2.1

Release clamps (2) and detach lines (3) from the activated charcoal canister (1).

Model 190 with engine 178
except code 494 (US version)

 Installation: Replace clamps (2).

 Pliers for click clamps

*171589003700

2.2

Release clamp (2) and detach line (3) from the activated charcoal canister (1).

Model 190 with engine 178
with code 494 (US version)

 Installation: Replace clamp (2).

 Pliers for click clamps

*171589003700

3

Release coupling (4) and detach line (3) from the activated charcoal canister (1).

Model 190 with engine 178
with code 494 (US version)

4

Release and disconnect the electrical connector (5).

Model 190 with engine 178
with code 494 (US version)

5

Release retaining clamp (6) and remove activated charcoal canister (1).

 Installation: Ensure that activated charcoal canister (1) is seated correctly.

6

Install in the reverse order