ar4720s5717a

Remove/install fuel pump control unit

Typ ar · temat 47.20 · wersja 0201 · 2019-08-23

Dotyczy: Model 447, 448

Niedostępne w języku „pl”; wyświetlono w języku Angielski.

Umiejscowienie

Grupa funkcyjna 1 Silnik › 47 Układ paliwowy, zasilanie energią zespołu napędowego › 47.20 Pompa paliwa, filtr — Seria 447 · Seria 448

EinPAS 16 Zasilanie paliwem/ energią silnika › 16.10 Zasilanie paliwem › 16.10.11 Moduł sterujący/ przekaźnik — Seria 447 · Seria 448

AR47.20-S-5717A

Remove/install fuel pump control unit

22.08.2019

Model

447, 448

Modification notes

12.11.2018

Remove seat console of driver's seat, added.

Step 4

Remove/install fuel pump control unit

S47.20-4571-09

Shown on model 447.8 with engine 651

1

Stowage box/tray

4

Nuts

2

Electrical connector

5

Fuel pump control unit

3

Electrical connector

Remove/install fuel pump control unit

S47.20-A002-79

Shown on model 447.8 with engine 654.9

1

Stowage box/tray

3

Electrical connector

6

Bracket

2

Electrical connector

5

Fuel pump control unit

Topical note

Information on preventing damage to electronic components due to electrostatic discharge

AH54.00-P-0001-01A

Topical note

Notes on carrying out repair work in the vehicle interior

AH68.00-N-0001-01S

Remove/install

1

Connect vehicle diagnosis system and perform commissioning of fuel system control unit (5).

If fuel system control unit (5) will be replaced.

AD00.00-S-2000-04E

2

Switch off the ignition and keep the transmitter key outside the transmitter range (at minimum   2m).

3

Remove stowage compartment (1).

4

Remove seat console of driver's seat.

Model 447.8, 448.8
with code E65 (Burmester surround sound system)

AR91.10-S-3000E

5.1

Unscrew nuts (4) and remove fuel system control unit (5) until electrical connectors (2, 3) can be disconnected.

Model 447, 448 with engine 274, 622.9, 651

5.2

Remove fuel system control unit (5) from bracket (6) until electrical connectors (2, 3) can be disconnected.

Model 447 with engine 622.8
Model 447 with engine 654.9

6

Disconnect electrical connectors (2, 3).

7

Remove fuel system control unit (5).

8

Install in the reverse order

Warning

Risk of accident from vehicle starting off by itself when engine running. Risk of injury (bruises and burns) resulting from working on the engine while it is being started or when it is running.

Secure vehicle to prevent it from starting off by itself. Wear closed and snug-fitting work clothes. Do not touch hot or rotating parts.

AS00.00-Z-0005-01A

9

Perform engine test run.

Powiązane dokumenty