P47.10-0291-08
48/1 Sealing flange
48/2 O-ring
A Immersed pipe sender
B Lever sender
B4 Fuel gauge sender
48/3 O-ring
48/4 Seal
| Removal, installation | ||
Danger! | Risk of explosion from ignition. Risk of poisoning from inhaling and swallowing fuel. Risk of injury as a result of fuel coming into contact with skin and eyes. | No fire, naked flame or smoking. Pour fuels only into suitable and appropriately marked containers. Wear protective clothing when handling fuel. | |
1 | If fuel tank is full, pump out about 8 liters of fuel | ||
2 | Remove trim panel for fuel tank in trunk | ||
3 | Unplug coupling (arrow) for fuel gauge sender (B4) | Secure electric cable to prevent it slipping off | |
4.1 | Unbolt sealing flange (48/1) and fuel gauge sender (B4) | | |
| Lever sender replaces immersed pipe sender | ||
4.2 | Open bayonet lock of fuel gauge sender (B4) | | |
5 | Take out fuel gauge sender (B4) | ||
6 | Install in the reverse order | ||
7 | Replace O-rings (48/2, 48/3, 48/4) | Oil to facilitate installation |
Fuel tank
Number | Designation | Model 140 | ||
BA47.10-P-1003-01B | Sealing flange and fuel gauge sender to fuel tank | Nm | 40 | |
210 589 01 07 00
Pin wrench
Powiązane dokumenty
- ar4710p4001b
- ar4710p4001b Opróżnianie, napełnianie zbiornika paliwa
- as4700z000101a Niebezpieczeństwo wybuchu wskutek zapalenia, niebezpieczeństwo zatrucia wskutek wdychania i połknięcia paliwa oraz niebezpieczeństwo obrażeń wskutek kontaktu skóry i oczu z paliwem.
- bt4710p000101a Czujnik zanurzeniowy zastąpiony czujnikiem dźwigniowym
- ra68001400480x