ar4640d7242b

Remove/install ball head

Typ ar · temat 46.40 · wersja 0600 · 2007-04-24

Dotyczy: MODEL WD1, WD2, WD3, WD6, WD7, XD1, XD2, XD3, XD4, XD5, XD6, XD7, YD1, YD2, YD3, YD4, YD5, YD6, YD7 MODEL 903.61 /66 /67, 904.61 /66 with CODE (ZU7) National version for Canada MODEL 903.61 /66 /67, 904.61 /66 with CODE (ZU8) National version for USA MODEL 903.61 /62 /66 /67, 904.61 /62 /66 with CODE (ZU9) National version for Mexico

Niedostępne w języku „pl”; wyświetlono w języku Angielski.

Umiejscowienie

Grupa funkcyjna 2 Podwozie › 46 Układ kierowniczy › 46.40 Mechanizm zwrotniczy — Seria 903 (modele 61*, 62*, 66*, 67*) · Seria 904 (modele 61*, 62*, 66*)

EinPAS 22 Układ kierowniczy › 22.15 Wspomaganie kierownicy › 22.15.43 Dźwignia zwrotnicy/drążek kierowniczy wzdłużny/drążek kierowniczy poprzeczny/amortyzator — Seria 903 (modele 61*, 62*, 66*, 67*) · Seria 904 (modele 61*, 62*, 66*)

AR46.40-D-7242B

Remove/install ball head

24.4.07

MODEL WD1, WD2, WD3, WD6, WD7, XD1, XD2, XD3, XD4, XD5, XD6, XD7, YD1, YD2, YD3, YD4, YD5, YD6, YD7

MODEL 903.61 /66 /67, 904.61 /66 with CODE (ZU7) National version for Canada

MODEL 903.61 /66 /67, 904.61 /66 with CODE (ZU8) National version for USA

MODEL 903.61 /62 /66 /67, 904.61 /62 /66 with CODE (ZU9) National version for Mexico

Remove/install ball head

D46.40-0003-06

1 Nut

2 Ball head

3 Lock nut

4 Tie rod

Puller

Modification notes

24.4.07

Lock nut at ball head

*BA46.40-N-1003-06D

Remove

1

Jack up vehicle.

Secure vehicle to prevent it rolling away.

2

Remove wheels.

3

Unscrew nut (1).

4

Slacken lock nut (3).

5

Pull ball head (2) off steering arm.

*601589043300

6

Unscrew ball head (2) from tie rod (4).

Install

7

Screw ball head (2) onto tie rod (4).

8

Press ball head (2) on tie rod (4) firmly into socket.

Before installing, clean grease off socket joint and clean contact surfaces on steering arm (arrows).

9

Tighten nut (1) for ball head.

*BA46.40-N-1001-06D

10

Install wheels.

*BA40.10-N-1001-01A

11

Lower vehicle.

12

Adjusting toe

AR40.20-D-0200D

To adjust the toe:

Undo bellows on tie rods and then refasten.

AR46.40-D-7200-01A

13

Tighten lock nut (3).

*BA46.40-N-1003-06D

Wheels

Number

Designation

Model
WD1, WD2, WD3, WD6, WD7,
XD1, XD2, XD3, XD6, XD7,
YD1, YD2, YD3, YD6, YD7

Model
XD4, XD5, XD8, YD5, YD8, YD9, XD9,
YD4

BA40.10-N-1001-01A

Wheel bolt or lug nut

Nm

240 (+10)

190 (+20)

Steering linkage

Number

Designation

Model
690.6, 901, 902, 903, 904, 905

Model
WD1/WD2/
WD3/WD6/
WD7/XD1/
XD2/XD3/
XD4/XD5/
XD6/XD7/
YD1/YD2/
YD3/YD4/
YD5/YD6/
YD7

BA46.40-N-1001-06D

Nut on ball joint

M141.5

1st step

Nm

-

-

2nd stage

°

-

-

M161.5

Nm

130

130

BA46.40-N-1003-06D

Lock nut at ball head

Nm

65

65

Remove/install ball head

601 589 04 33 00

Puller

Powiązane dokumenty