Checking oil pressure of power steering pump

AR46.30-P-0100TY

Checking oil pressure of power steering pump

23.11.09



Removing

 Danger!

Risk of injury to skin or eyes caused by hydraulic fluid spraying out under high pressure. Risk of poisoning caused by swallowing hydraulic fluid

Depressurize the hydraulic system completely before starting any work on the system. Wear protective clothing and safety glasses.

AS00.00-Z-0013-01A



Before opening the hydraulic system, thoroughly clean the area surrounding the separation point. Even the smallest dirt particles, introduced into the hydraulic components, can lead to malfunctions and a total failure of the hydraulic system

1

Open engine hood

AR88.40-P-1000TX

2

Remove left air intake duct (1) upstream of air filter

3

Remove front engine cover (2)

See remove/install air filter housing:

Engine 113.967

AR09.10-P-1150TY

Engine 113.990

AR09.10-P-1150TZ

4

Suction off steering gear oil from the power steering expansion reservoir (3)



*210589007100

5

Disconnect high-pressure expansion hose (4) from power steering pump

6

Fit high-pressure expansion hose (4) using  banjo bolt (06d) to  adapter (06e)



*211589136300

7

 Fit connection hose (07a) using  banjo bolt (06c) to  adapter (06e)



*215589016300



*211589136300

8

 Mount adapter (06a) to  connection hose (07a)



*211589136300



*215589016300

9

 Mount adapter (06a) to  throttle valve (05b)



*211589136300



*124589062100

10

 Mount adapter (05a) to  throttle valve (05b)



*124589062100

11

 Mount testing unit (05) to  adapter (05a) and  adapter (06b)



*124589062100



*211589136300

12

 Mount connection hose (07b) to  adapter (06b)



*215589016300



*211589136300

13

 Mount connection hose (07b) using banjo bolt (8) to power steering pump

 Banjo bolt: Banjo bolt for securing high-pressure expansion hose to power steering pump.



*215589016300

14

Fill power steering pump and bleed

AR46.30-P-0010TY

 Danger!

Risk of accident from vehicle starting off by itself when engine running. Risk of injury from bruises and burns if you hold your hand into engine when it is started or when it is running.

Secure vehicle to prevent it moving off.

Wear closed and close-fitting work clothes.

Do not touch hot or rotating parts.

AS00.00-Z-0005-01A

15

Start engine

16

Increase engine speed to approx. 1000 rpm



Checking

17

 Close throttle valve (05b) on  testing unit (05) and check the maximum operating pressure

 Perform the test quickly to prevent the steering gear oil temperature from rising too high.

Pressure in power steering pump

*BE46.30-P-1001-01F

18

Turn off engine

19

Suction steering gear oil out of the expansion reservoir (3)



*210589007100

20

 Remove testing unit (05),  adapters (05a, 06a, 06b),  throttle valve (05b),  connection hoses (07a, 07b) and  adapter (06e)



Install

21

Mount high-pressure expansion hose (4) using banjo bolt (8) to power steering pump



*BA46.30-P-1001-01G

 Install new sealing rings.

22

Fill power steering pump and bleed

AR46.30-P-0010TY

23

Install front engine cover (2)

See remove/install air filter housing:

Engine 113.967

AR09.10-P-1150TY

Engine 113.990

AR09.10-P-1150TZ

24

Install left intake air duct (1) upstream of air filter



Checking

25

Run engine and check power steering for leaks

 In the event of leakage, find and eliminate cause.

26

Close engine hood

AR88.40-P-1000TX

Number

Designation

Model
219
with engine 113, 156, 272, 273, 642

BE46.30-P-1001-01F

Pressure in power steering pump

bar

120...128

Number

Designation

Model
219
with engine
113

BA46.30-P-1001-01G

Banjo bolt, high pressure expansion hose to power steering pump

Nm

45