AR46.30-D-0500B | Removing and installing power steering pump | 1.7.96 |
STEERING 765.841 with ENGINE 602.985
D46.30-0005-06
1 Compressor
2 Power steering pump
3 Cross plate
5 Hexagon bolt
6 Delivery pipe connection
7 Suction pipe connection
| Removal, installation | ||
1 | Remove bottom engine cover | ||
2 | Extract fluid from power steering pump | | |
3 | Unbolt hydraulic fluid pipes (6, 7) at power steering pump (2) | Removing: collect hydraulic fluid which flows out Installing: replace seals | |
| |||
| |||
4 | Slacken bolts (5) and remove power steering pump | Removing: remove power steering pump to the side and rear; pay attention to cross plate (3) | |
| |||
5 | Take off cross plate (3) | Installing: rotate air compressor crankshaft until the guides of the cross plate (3) are positioned horizontally. Fit cross plate (3) onto air compressor crankshaft; secure with grease if necessary to prevent it slipping. | |
6 | Install in the reverse order | ||
7 | Bleed steering, check fluid level |
Power steering pump
Number | Designation | Steering 765.841 with engine 602.985 | ||
BA46.30-N-1001-01D | Bolt of power steering pump to compressor | Nm | 40 | |
BA46.30-N-1002-01D | Oil delivery pipe to power steering pump | Nm | 40 | |
BA46.30-N-1003-01D | Oil return flow pipe to power steering pump | Nm | 35 | |
Hand pump
112 589 00 72 00