Removing and installing electronic steering lock · ar4610p0910b · Mercedes-Benz WIS

AR46.10-P-0910B

Removing and installing electronic steering lock

8.1.97

MODEL 208

P46.10-0403-01

91a Screws

99 Steering column trim

Arrows Nuts

P46.10-0404-01

P46.10-0406-01

37m Securing bolts

37n Nut

37p Connector

N26/5 Electronic steering lock

P46.10-0405-01

 	Removing, installing
 Installation	Replace self-locking nuts and bolts
1	Remove steering wheel		AR46.10-P-0100C
2	Remove instrument cluster		AR54.30-P-6015EA
3	Remove cover below instrument panel		AR68.10-P-1500K
4	Unscrew steering column trim (99)
5	Detach jacket tube fixing	Installation: First of all fit on all nuts and bolts.
		 Tighten the bottom nuts (arrows) first of all.	*BA46.10-P-1001-03A
		 Bolts (91a).	*BA46.10-P-1002-03A
6	Unscrew nut (37n) of securing bolts (37m)		*BA46.10-P-1009-03A
N	Turn electronic ignition key into position "1" and lift securing bolt (37m) up and off	 The securing bolt can only be taken off if the electronic steering lock is unlocked.
8	Separate plug connection (37p)
9	Take electronic steering lock (N36/5) out of steering column
10	Install in the reverse order

 Jacket tube

Number	Designation		Model 208


BA46.10-P-1001-03A	Lower nut, jacket tube to body	Nm	20
BA46.10-P-1002-03A	Upper bolt, jacket tube to body	Nm	20
BA46.10-P-1009-03A	Nut of securing bolt of electronic steering lock to steering column	Nm	10