1 | From the full load position, move the lever back to a middle course (f) indicated in ALB label (half load position). |
2 | Actuate the brake pedal until indicating pressure at 8 bar (measuring point at adjustment valve of the braking force, at gantry 4). |
3 | Compare the braking pressure applied to the brake cylinders of the front and rear axle with ALB label data in accordance with the lever travel (travel f). |
If the pressures indicated in ALB label have not been reached, check if they are correct, rear springs, braking control valve, and lever length, according to the directions on the label ALB. If disagreement persists, check and repair any damage to the brake system. |
B42.80-0009-11
Example of ALB label for the vehicle 914C/37 (BM 688232) |
B42.80-0010-11
ALB label example for vehicle LS 1938/46 (BM 696.090) |
B42.80-0011-11
Example of ALB label for the vehicle 915E/31,5 (BM 688.272) |
B42.80-A002-11