P42.45-2587-05
1 Driver seat
2 Electrical connector
3 Nuts
B24/15 Yaw rate, lateral and longitudinal acceleration sensor
| Remove/install | ||
1 | Remove driver seat (1) | ||
2 | Reposition floor covering under the driver seat (1) in the rear area until the yaw rate, lateral and longitudinal acceleration sensor (B24/15) is accessible | When repositioning the floor covering ensure that this is not damaged due to breaking or cracking. | |
3 | Disconnect electrical connector (2) on yaw rate, lateral and longitudinal acceleration sensor (B24/15) | ||
4 | Unscrew nuts (3) on yaw rate, lateral and longitudinal acceleration sensor (B24/15) and remove yaw rate, lateral and longitudinal acceleration sensor (B24/15) | ||
5 | Install in the reverse order | ||
6 | Calibrate yaw rate, lateral and longitudinal acceleration sensor (B24/15) | Follow the instructions in the diagnosis assistant system. | |
| Connect STAR DIAGNOSIS and read out fault memory |