Remove/install ESP rpm sensor

AR42.45-P-0829RR

Remove/install ESP rpm sensor

13.10.03

 

Remove/install

1

Open front hood

2

Remove luggage compartment tray

3

Disconnect left front and right front connector (1)

 Check locking tabs.

4

Remove left front and right front bolt (2)



*BA42.30-P-1001-01D

5

Take left front rpm sensor (L6/1) and right front rpm sensor (L6/2) out of bracket and remove

6

Remove bolt (4) from folding clamp (3)

7

Open folding clamp (3) and disconnect connector (5) and connector (6)

8

Remove left rear and right rear bolt (7)



*BA42.30-P-1001-02C

9

Take left rear rpm sensor (L6/3) and right rear rpm sensor (L6/4) out of bracket and remove

 Installation: Make sure that the connecting cable is fitted at the correct position.

10

Install in the reverse order

Number

Designation

Model 452.3/4

BA42.30-P-1001-01D

Bolt of rpm sensor to steering knuckle

Nm

8

Number

Designation

Model 452.3/4

BA42.30-P-1001-02C

Bolt, rpm sensor to wheel carrier

Nm

8.0