AR42.45-P-0815RR | Check ESP [Electronic Stability Program] rpm sensor | 5.4.04 |
MODELS 452.3 /4
Front axle ESP rpm sensor
P42.30-2087-01
1 Pulse wheel
A Gap
L6/1 Left front rpm sensor
L6/2 Right front rpm sensor
| Remove | ||
Danger! | Risk of death caused by vehicle slipping or toppling off of the lifting platform. | Align vehicle between the columns of the lifting platform and position the four support plates at the lifting platform support points specified by the vehicle manufacturer. | |
1 | Raise vehicle. | Two-post lift | |
2 | Remove front brake disk | ||
| Check | ||
3 | Check left front rpm sensor (L6/1) / right front rpm sensor (L6/2) and left/right pulse wheel (1) for mechanical damage and fouling | ||
4 | Check gap (A) between left front rpm sensor (L6/1) / right front rpm sensor (L6/2) and left/right pulse wheel (1) | Gap | |
Feeler gauge | |||
| Install | ||
5 | Install front brake rotor. | ||
6 | Lower the vehicle from the lifting platform | Two-post lift |
Test and adjustment values for rpm sensor
Number | Designation | Models 452.3/4 | |||
BE42.45-P-1001-01A | Gap | Front rpm sensor to pulse wheel | Dimension "A" | mm | 1.2 |
Rear rpm sensor to pulse wheel | Dimension "A" | mm | 1.7 | ||
Commercially available tools
Workshop equipment
WE58.40-Z-1001-05A | Two-post lifting platform |
Powiązane dokumenty
- ar4210p0230rr
- as0000z001001a Zagrożenie życia na skutek ześlizgnięcia lub spadnięcia pojazdu z podnośnika.