Remove/install left/right front axle rpm sensor

AR42.40-P-9801RG

Remove/install left/right front axle rpm sensor

9.12.14

Model

190

Shown on right side of vehicle

1

Electrical connector

4

Screw

L6/2

Right front axle rpm sensor

2

Electrical connector

S10/2x1

Right front brake wear sensor electrical connector

3

Bracket

L6/1

Left front axle rpm sensor

 Danger !

Risk of death caused by vehicle slipping or toppling off of the lifting platform.

Align vehicle between vehicle lift columns and position the four support plates at the vehicle lift support points specified by the vehicle manufacturer.

AS00.00-Z-0010-01A



Notes on self-locking nuts and bolts

AH00.00-N-0001-01A



Information on preventing damage to electronic components due to electrostatic discharge

AH54.00-P-0001-01A

 

Remove/install



1

Switch off ignition, remove transmitter key if necessary and place transmitter key down outside of KEYLESS-GO transmission range

2

Lift vehicle on vehicle lift

AR00.60-P-1000RG

3

Remove left or right front wheel and tire assembly

AR40.10-P-1100RQ

4

Remove fender liners in left or right front fender

AR88.10-P-1300RG

 Only the rear fender liner.

5

Disconnect electrical connector (1)

6

Detach right front brake wear sensor electrical connector (S10/2x1) from brake caliper

 Only at the right front brake caliper.

 Installation: Replace screw/bolt.

 Bolt, brake wear indicator to brake caliper

*BA42.10-P-1002-10T

7

Disconnect electrical connector (2)

8

Unhook electrical line from bracket (3)

9

Remove bolt (4)

 Installation: Replace screw/bolt.

 Self-locking bolt, rpm sensor on front axle to steering knuckle

*BA42.30-P-1001-01A

10

Pull out front axle rpm sensor (L6/1) or (L6/2) and remove together with electrical line from vehicle

11

Install in the reverse order



Check

12

Connect STAR DIAGNOSIS, read out fault memory and erase if necessary



Connect STAR DIAGNOSIS and read out fault memory

AD00.00-P-2000-04B

 Front axle brake caliper

Number

Designation

MODEL 190 with CODE B06

MODEL 190 with CODE B07

BA42.10-P-1002-10T

Bolt, brake wear indicator to brake caliper

Nm

8

8

 Front axle brake caliper

Number

Designation

MODEL 190 with CODE U70

BA42.10-P-1002-10T

Bolt, brake wear indicator to brake caliper

Nm

8

 Front axle rpm sensor

Number

Designation

Model 190

BA42.30-P-1001-01A

Self-locking bolt, rpm sensor on front axle to steering knuckle

Nm

8