Remove/install front rpm sensor

AR42.30-P-0713MFA

Remove/install front rpm sensor

20.11.2019

Model

118, 177, 247

Shown on left side of vehicle

1

Electrical connector

L6/1

Left front axle rpm sensor

2

Screw

L6/2

Right front axle rpm sensor

 Warning

Risk of injury. Skin or eye injuries may result when handling hot or glowing objects.

Wear protective gloves, protective clothing and safety glasses, if necessary.

AS00.00-Z-0002-01A

Topical note

Information on preventing damage to electronic components due to electrostatic discharge

AH54.00-P-0001-01A

Topical note

Notes on self-locking nuts and bolts

AH00.00-N-0001-01A

Notes on safety-relevant components

AH00.00-Z-0019-01A

 

Remove/install

1

Switch off ignition and store transmitter key outside of transmitter range (min. 2 m).

2

Remove corresponding wheel and tire assembly.

AR40.10-P-1102MFA

3

Release electrical connector(1) and disconnect.

4

Remove bolt (2).

 Bolt, rpm sensor to steering knuckle

*BA42.30-P-1001-01F

5

Remove left front axle rpm sensor (L6/1) or right front axle rpm sensor(L6/2).



Check

6

Check left front axle rpm sensor (L6/1) or right front axle rpm sensor (L6/2) for damage.

If the left front axle rpm sensor (L6/1) or right front axle rpm sensor (L6/2) are damaged,



replace left front axle rpm sensor (L6/1) or right front axle rpm sensor (L6/2).

7

Install in the reverse order.

 Front axle rpm sensor

Number

Designation

Model 118

Model 177

BA42.30-P-1001-01F

Bolt, rpm sensor to steering knuckle

Nm

8

8

 Front axle rpm sensor

Number

Designation

Model 247

BA42.30-P-1001-01F

Bolt, rpm sensor to steering knuckle

Nm

8