ar4230p0170sn

Check ABS rpm sensor

Typ ar · temat 42.30 · wersja 0101 · 2006-07-26

Dotyczy: MODELS 450.4 /3 up to 2.1.03 ABS rpm sensor for rear axle

Niedostępne w języku „pl”; wyświetlono w języku Angielski.

Umiejscowienie

Grupa funkcyjna 2 Podwozie › 42 Układ hydrauliczny i mechanizm hamulców › 42.30 Układ ABS — Seria 450 (modele 3**, 4**)

EinPAS 26 Aktywne systemy bezpieczeństwa › 26.20 System kontroli trakcji/ hamowania › 26.20.12 Czujnik/ przełącznik/ wiązka przewodów — Seria 450 (modele 3**, 4**)

AR42.30-P-0170SN

Check ABS rpm sensor

29.11.02

MODELS 450.4 /3 up to 2.1.03
ABS rpm sensor for rear axle

Check ABS rpm sensor

P42.30-2086-04

1 Pulse wheel

A Gap

L6/3 Left rear rpm sensor

L6/4 right rear rpm sensor

Danger!

Risk of death caused by vehicle slipping or toppling off of the lifting platform.

Align vehicle between the columns of the lifting platform and position the four support plates at the lifting platform support points specified by the vehicle manufacturer.

AS00.00-Z-0010-01A

1

Raise vehicle.

Two-post lift

*WE58.40-Z-1001-05A

Check

2

Check left rear rpm sensor (L6/3) or right rear rpm sensor (L6/4) and the pulse wheel (1) on the left or right for mechanical damage and dirt

3

Check the gap (A) between the left rear rpm sensor (L6/3) or right rear rpm sensor (L6/4) and the pulse wheel (1) on the left or right

Gap

*BE42.30-P-1001-01B

Feeler gauge

*WH58.30-Z-1004-12A

4

Lower the vehicle from the lifting platform

Two-post lift

*WE58.40-Z-1001-05A

Test and adjustment values for gap dimension of rpm sensor on front and rear axle

Number

Designation

Model
450.3/4

BE42.30-P-1001-01B

Gap

Front rpm sensor to pulse wheel

Dimension "A"

mm

1.2

Rear rpm sensor to pulse wheel

Dimension "A"

mm

1.7

Commercially available tools

Number

Designation

WH58.30-Z-1004-12A

Feeler gauge

Workshop equipment

WE58.40-Z-1001-05A

Two-post lifting platform

Powiązane dokumenty