AR42.30-B-0150A | Remove/install ABS sensor | 12.02.16 |
Vehicle 382.1 with CODE B02 (Anti-lock braking system (ABS))
Vehicle 693.1 with CODE B02 (Anti-lock braking system (ABS))
Vehicle 695.0 with CODE B02 (Anti-lock braking system (ABS))
Vehicle 695.3 with CODE B02 (Anti-lock braking system (ABS))
Vehicle 696.0 with CODE B02 (Anti-lock braking system (ABS))
B42.30-1053-04
1 ABS sensor
2 Brass bushing
| Remove and install | ||
1 | Remove ABS sensor (1) from the front axle | Do not pull ABS sensor (1) through cables. | |
Install: Lubricate ABS sensor (1) and insert it in metal bush (2). | |||
Caution: Install the black connector in left side and the orange ones in right side of the axle. | |||
2 | Remove the rear wheel hub | ||
3 | Remove ABS sensor (1) from rear axle | Do not pull ABS sensor (1) through cables. | |
Install: Lubricate ABS sensor (1) and insert it in metal bush (2). | |||
Caution: Install the black connector in left side and the orange ones in right side of the axle. | |||
4 | Remove brass bushing (2) | Install: After cleaning up its housing apply a new bushing. | |
5 | Install in reverse order |