1 | Spring |
2 | Cable |
3 | Retaining springs |
4 | Brake shoes |
5 | Adjuster |
6 | Contact surfaces |
S42.10-4541-06
| Remove | ||
Danger | Risk of accident when commissioning the vehicle due to a lack of braking effect when the service brake is operated for the first time after repair work. | Before starting the engine, actuate brake pedal several times until pressure is built up and maintained in the brake system. | |
Topical note | Notes on repairs to brake system | ||
1 | Remove brake drum | ||
2 | Remove spring (1) | ||
3 | Unhook cable (2) of parking brake | ||
4 | Remove retaining springs (3) | For doing this, counterhold link rods of retaining springs (3) from the rear, unlock retaining springs (3) and remove. | |
5 | Remove link rods of retaining springs (3) | ||
6 | Remove brake shoes (4) together with brake adjuster (5) | | |
| Clean | ||
7 | Clean the brake anchor plate and brake shoes (4) | Installation: | |
Cold degreasing agent/cold cleaning solvent HAKU 1025-920 | |||
MB brake paste Molykote (copper colored) | |||
| Install | ||
8 | Install brake shoes (4) together with brake adjuster (5) | | |
9 | Insert link rods of retaining springs (3) | ||
10 | Install retaining springs (3) | ||
11 | Hook in cable (2) | Check the cable (2) for correct seating and unobstructed movement. | |
12 | Install spring (1) | ||
13 | Adjust brake adjuster (5) for installation of brake drums | ||
14 | Install brake drum |
Repair materials |
Number | Designation | Order number |
BR00.45-Z-1051-04A | Cold degreasing agent/cold cleaning solvent HAKU 1025-920 | Chemische Werke Kluthe GmbH |
BR00.45-Z-1057-06A | MB brake paste Molykote (copper colored) | A 001 989 87 51 |
Powiązane dokumenty
- ah4200p000301a Wskazówki dotyczące napraw układu hamulcowego
- ar4210s016901c Regulacja automatycznego nastawnika
- ar4210s1010c
- as4250z000201a Niebezpieczeństwo wypadku podczas uruchamiania pojazdu na skutek zaniku działania hamulców przy pierwszym naciśnięciu hamulca zasadniczego po przeprowadzeniu prac naprawczych.