P42.10-2143-01
1 Catch
2 Actuating pin
24 Brake pedal
S9/1 Stop lamp switch
| Remove/install | ||
1 | Remove left cover below instrument panel | ||
2 | Unplug electric connector at stop lamp switch (S9/1) | ||
3 | Press catch (1) | ||
4 | Turn and withdraw stop lamp switch (S9/1). | Installation: Pull out actuating pin (2) completely. Depress the brake pedal (24), insert stop lamp switch (S9/1) and turn until catch (1) engages. The actuating path is adjusted automatically. | |
5 | Install in the reverse order |