Bleed brake system · ar4210p0010gw · Mercedes-Benz WIS

AR42.10-P-0010GW

Bleed brake system

11.10.2018

Model	463 (except 463.270/271)
	as of model year 2013 up to model year 2019

P42.10-2920-09

1	Right rear brake caliper	4	Left front brake caliper	A	Bleed screw
2	Left rear brake caliper	5	Cap	B	Bleed screw
3	Right front brake caliper	6	Brake fluid reservoir	C	Bleed screw

 Caution	Risk of poisoning from swallowing brake fluid. Risk of injury from skin and eye contact with brake fluid	Only pour brake fluid into suitable and appropriately marked containers. Wear protective clothing and eye protection when handling brake fluid.	AS42.50-Z-0001-01A
 Warning	Risk of injury. Skin or eye injuries may result when handling hot or glowing objects.	Wear protective gloves, protective clothing and safety glasses, if necessary.	AS00.00-Z-0002-01A
Topical note	Notes on repairs to brake system		AH42.00-P-0003-01A
Topical note	Brake fluid notes		AH42.50-P-0001-01A
 	Remove/install
1	Open hood		AR88.40-P-1000GG
2	Unscrew cap (5) of brake fluid reservoir (6) and add new brake fluid up to MAX marking
3	Connect filling and bleeding unit on brake fluid reservoir (6) and switch on	 Observe manufacturer's operating instructions.
4	Remove front wheel-and-tire assemblies
			AP40.10-P-4050G
5	Carrying out bleeding operation	Model 463 (except 463.270/271) as of model year 2016 up to model year 2019	AR42.10-P-0010-02GWA
		Model 463 (except 463.270/271) as of model year 2013 up to model year 2016	AR42.10-P-0010-02GW
		 The bleeding sequence in the reference document must always be adhered to. Otherwise the brake system may fail.
		 Bleed screw at front axle fixed brake caliper	*BA42.10-P-1001-02B
		 Bleed screw on rear axle floating caliper	*BA42.10-P-1001-17B
6	Install in the reverse order
	Check
 Danger	Risk of accident when commissioning the vehicle due to a lack of braking effect when the service brake is operated for the first time after repair work.	Before starting the engine, actuate brake pedal several times until pressure is built up and maintained in the brake system.	AS42.50-Z-0002-01A
7	Press brake pedal several times and check brake system for leak tightness	Model 463 (except 463.270/271) as of model year 2013 up to model year 2019 except code 979 (Special protection MB Guard)
		Model 463 (except 463.270/271) as of model year 2013 up to model year 2019 except code 979 (Special protection MB Guard)	AR42.10-P-0100-01A
		 Firm resistance should be noticeable at the brake pedal.
8	Carry out brake test on the test stand

 Front axle fixed brake caliper

Number	Designation		Model 461 (except 461.339) Model 463 up to model year 2019
BA42.10-P-1001-02B	Bleed screw at front axle fixed brake caliper	Nm	14

 Rear axle floating caliper

Number	Designation		Model 461 Model 463 (except 463.270/271/272/273) up to model year 2019	Model 463.270/271/272/273 up to model year 2019
BA42.10-P-1001-17B	Bleed screw on rear axle floating caliper	Nm	15	17

Powiązane dokumenty

ah4200p000301a Wskazówki dotyczące napraw układu hamulcowego
ah4250p000101a Wskazówki dotyczące płynu hamulcowego
ap4010p4050g Demontaż i montaż kół, w razie potrzeby przełożenie
ar4210p001002gw
ar4210p001002gwa
ar4210p010001a Sprawdź szczelność układu hamulcowego.
ar4210p010001a
ar8840p1000gg Pokrywa komory silnika otwieranie, ustawianie w pionie, zamykanie
ar8840p1000gg
as0000z000201a Niebezpieczeństwo zranienia skóry i oczy na skutek kontaktu z gorącymi lub żarzącymi się przedmiotami
as4250z000101a Niebezpieczeństwo zatrucia na skutek połknięcia płynu hamulcowego. Niebezpieczeństwo zranienia wskutek kontaktu skóry i oczu z płynem hamulcowym
as4250z000201a Niebezpieczeństwo wypadku podczas uruchamiania pojazdu na skutek zaniku działania hamulców przy pierwszym naciśnięciu hamulca zasadniczego po przeprowadzeniu prac naprawczych.