ar4110p008503mfc

Measure absolute angle at rear axle housing

Typ ar · temat 41.10 · wersja 0101 · 2019-12-05

Dotyczy: Model 118, 177, 247 with engine 139, 260, 282, 654 with code M005 (Vehicles with 4MATIC/all-wheel drive)

Niedostępne w języku „pl”; wyświetlono w języku Angielski.

Umiejscowienie

Grupa funkcyjna 2 Podwozie › 41 Wał napędowy › 41.10 Wał napędowy — Seria 118 · Seria 177 · Seria 247 · Seria 654

EinPAS 17 Zespół przeniesienia napędu/ oś › 17.40 Wał napędowy › 17.40.30 Wał napędowy napędu/ napędu na cztery koła — Seria 118 · Seria 177 · Seria 247 · Seria 654

Dotyczy też silników/skrzyń biegów: 139 ***, 260 ***, 282 ***

AR41.10-P-0085-03MFC

Measure absolute angle at rear axle housing

Notes on measuring the drive shaft articulation angle

AH41.10-P-0002-01LF

000 588 04 19 00 Articulation angle inclinometer

WS26.00-P-0140B

Model

118, 177, 247 with engine 139, 260, 282, 654

with code M005 (Vehicles with 4MATIC/all-wheel drive)

Measure absolute angle at rear axle housing

Measurement of angle 4 on rear axle differential (3)
An angle that has already been measured can be measured a second time if required. To do so, with the Measurement menu displayed, press the "STEP" button repeatedly until the display indicates Ready to measure the relevant angle.

1

Mount sensor holder (020c) centrally onto sensor (020a).


P41.10-2064-01

Measure absolute angle at rear axle housing

2

Clean dirt as well as paint and sealant residue from contact surfaces of adapter (020h) on housing of rear axle differential (3).


Remove any unevenness on surface of material using a suitable tool.



3

Fit sensor (020a) with magnetic sensor mount (020c) onto magnetic adapter (020h) by turning slightly.


When each measurement is taken, the side of the sensor (020a) at which the spiral cable (020b) is connected must point in the direction of travel.
False measurements can occur otherwise.



4

Place and hold measuring instrument with magnetic adapter (020h) and sensor (020a) on the housing of rear axle differential (3).


Aid of helper required.



5

Align strut fitted with spirit level (020i) so that it is horizontal, and tighten screws/bolts (020k).


Aid of helper required.


Example illustration

P41.10-2397-06

Measure absolute angle at rear axle housing

The meter is ready to take a measurement. The value measured is shown on the display.

6

Press "SAVE" button.


The device saves the values.


Measurement value display message angle piece 4: Display, e.g. 2.68°

P41.10-2082-01

Measure absolute angle at rear axle housing

A confirmation message appears briefly and then the meter indicates that it is ready to measure the next angle. The measurement is completed and stored in memory.

Display message confirmation

P41.10-2076-01

7

Remove measuring instrument with magnetic adapter (020h) and sensor (020a).

8

Protect contact surfaces of adapter (020h) on housing of rear axle differential (3) against corrosion.

Powiązane dokumenty