P40.00-0040-01
S40.20-1000-01
| Removing and installing | ||
1 | Remove wheel trims | ||
2 | Check correct state of the feelers (5 pieces) of the quick-release clamping holder as well as of the holes in the rim | Check the MB quick-release clamping holder at regular intervals following the manufacturer's instructions. With the feelers the value detector will be centred in the centre of the wheel hub. | |
3 | Place the MB quick-release clamping holder in the front and rear wheels | ||
4 | Withdraw the tensioning handles of the MB quick-release clamping holder on the front wheels | The tensioning handles stick in the wheel pass when the front wheels are turned right round. | |
5 | Install the value detector on the quick-release clamping holder | ||
6 | The removal is carried out in reverse order |
124 589 01 31 00
Quick-release clamping holder