ar4015s0100e

Remove/install tire pressure monitoring system control unit

Typ ar · temat 40.15 · wersja 0201 · 2016-01-18

Dotyczy: Model 447, 448 with code RY2 (Tyre pressure monitoring system)

Niedostępne w języku „pl”; wyświetlono w języku Angielski.

Umiejscowienie

Grupa funkcyjna 2 Podwozie › 40 Koła, pomiary podwozia › 40.15 Ciśnienie w oponach i jego monitorowanie — Seria 447 · Seria 448

EinPAS 26 Aktywne systemy bezpieczeństwa › 26.29 Monitorowanie ciśnienia w oponach/regulacja ciśnienia w oponach › 26.29.11 Moduł sterujący/ przekaźnik — Seria 447 · Seria 448

AR40.15-S-0100E

Remove/install tire pressure monitoring system control unit

14.1.16

Model

447, 448

with code RY2 (Tyre pressure monitoring system)

Remove/install tire pressure monitoring system control unit

1

Electrical connector

2

Electrical wiring harness

3

Nut

N88/1

Tire pressure monitor (RDK) control unit

S40.15-4518-11

Danger !

Risk of death caused by vehicle slipping or toppling off of the lifting platform.

Align vehicle between vehicle lift columns and position the four support plates at the vehicle lift support points specified by the vehicle manufacturer.

AS00.00-Z-0010-01A

Remove/install

1

Raise vehicle

AR00.60-S-1000E

2

Disconnect electrical connector (1)

3

Expose electrical wiring harness (2)

To do so, remove the retaining clamp.

4

Remove the tire pressure monitor (TPM) control unit (N88/1) together with the bracket

To do so, unscrew nuts (3).

5

Remove tire pressure monitor (TPM) control unit (N88/1) from the bracket

Only when replacing the tire pressure monitor (TPM) control unit (N88/1).

6

Install in the reverse order

7

Commission tire pressure monitor (TPM) control unit (N88/1)

Only when replacing the tire pressure monitor (TPM) control unit (N88/1).

Connect STAR DIAGNOSIS and read out fault memory

AD00.00-S-2000-04E

Powiązane dokumenty