ar4015p0101mfa

Remove/install tire pressure monitoring control unit

Typ ar · temat 40.15 · wersja 0100 · 2020-08-20

Dotyczy: Model 118, 177, 247 with code 475 (Tire pressure monitor (TPM))

Niedostępne w języku „pl”; wyświetlono w języku Angielski.

Umiejscowienie

Grupa funkcyjna 2 Podwozie › 40 Koła, pomiary podwozia › 40.15 Ciśnienie w oponach i jego monitorowanie — Seria 118 · Seria 177 · Seria 247

EinPAS 26 Aktywne systemy bezpieczeństwa › 26.29 Monitorowanie ciśnienia w oponach/regulacja ciśnienia w oponach › 26.29.11 Moduł sterujący/ przekaźnik — Seria 118 · Seria 177 · Seria 247

AR40.15-P-0101MFA

Remove/install tire pressure monitoring control unit

30.07.2020

Model

118, 177, 247

with code 475 (Tire pressure monitor (TPM))

Remove/install tire pressure monitoring control unit

P40.15-A019-08

1

Electrical connector

2

Nut

N88

Tire pressure monitor control unit

Topical note

Information on preventing damage to electronic components due to electrostatic discharge

AH54.00-P-0001-01A

Remove/install

1

Perform commissioning of tire pressure monitoring system control unit (N88).

If tire pressure monitoring system control unit (N88) is replaced.

AD00.00-P-2000-06MFA

2

Remove underfloor paneling at left.

AR61.30-P-1001MFA

3

Release electrical connector(1) and disconnect.

4

Remove nuts (2) and remove tire pressure monitoring system control unit (N88).

Installation:
Do not tighten the new nuts (2), press them on, only until they make contact.
Otherwise, the nuts will be damaged (2).

Installation: Install new nuts (2).

5

Install in the reverse order.

Finishing activity

6

Reset tire pressure monitoring system using instrument cluster.

If tire pressure monitoring system control unit (N88) was replaced.

Powiązane dokumenty