Remove/install wheels

AR40.10-P-1100MCU

Remove/install wheels

12.12.08

 

Remove/install

Danger!

Risk of death caused by vehicle slipping or toppling off of the lifting platform.

Align vehicle between columns of vehicle lift and position four support plates at vehicle lift support points specified by vehicle manufacturer.

AS00.00-Z-0010-01A

1

Raise vehicle with vehicle lift

2

Secure vehicle on vehicle lift

When work is continued on the vehicle such as, e.g. when supporting major assemblies using a jack (e.g. transmission jack) which exert an uneven load distribution,

as well as when removing the following components:

Front axle, front axle carrier, axle tube, rear-axle frame-type integral support, engine or transmission.

AR00.60-P-0100MCC

3

Detach wheel cover

Only on vehicles with steel wheels.

4

Unscrew wheel bolts and remove wheels

 In order to prevent damage, an impact wrench must not be used on light alloy rims.

 If the adapter for loosening the wheel antitheft locks is not available the set of master keys should be used.



*BA40.10-P-1001-01E



*450589050900



*451589010900

5

Check wheel contact surfaces for dirt and corrosion

 Clean corroded surfaces with a wire brush or an emery cloth.

6

Install in the reverse order

7

Correct the tire inflation pressure in all wheels

 In the event of tire pressure loss: Determine cause and replace tires if necessary.

8

Press the TPM switch (S6/1s9) in the cockpit switch group (S6/1) and as a result recalibrate the tire pressure monitoring system

Number

Designation

Model 451.3/4

BA40.10-P-1001-01E

Wheel bolt

Nm

110