W40.10-0002-01
1 Bell hub
2 Wheel nut
3 Disk wheel
4 Brake drum
5 Wheel bolt
6 Spherical ring
7 Spherical spring washer
| Remove/install | ||
1 | Secure vehicle against rolling | ||
2 | Slacken wheel nuts (2) | Installation: Tighten wheel nuts (2) crosswise. Tighten wheel nuts (2) using impact wrench/driver lightly only and then tighten using a torque wrench to the specified tightening torque. | |
| |||
3 | Raise vehicle until the wheels are free to rotate and support vehicle | ||
4 | Remove wheels | Installation: Ensure that spherical rings (6) are put on wheel studs (5). | |
| Checking | ||
5 | Check wheels for damage and condition, replace if necessary | ||
6 | Check all wheel nuts (2) for damage, replace if necessary | ||
7 | Check all wheel studs (5) for damage, replace if necessary | ||
8 | Install in the reverse order | ||
9 | Tighten wheel nuts (2) to the specified tightening torque | Perform after the first 50 to 100 km. | |
|
Wheels